el bandido
TNAP-Images
Translated From German to English:
Quoted from "pinky1981"
here the first "beta to be regarded as" evo image
spark for the triplex (7162) box!
flashed wirds as Evolux!
This image is NOT for gm990 + co!
exclusively for GM TRIPLEX7162 boxes and identical as Amiko alien2 etc.!
imho is just e2pli!
it is a pure e2 image!
known bugs:
-spdif/coax seems flatly at least here via coax cable no sound!
ton so only via hdmi!
-On time of boot is wrong!
Please go down to once after firstboot box properly and start on a transmitter can be as ard / zdf the time of send them along!
-Please after firstboot vali-hd-nano skin change because this is the best!
(Mini-pic on hdtv is chopped shown in the skin which is not be harmful to the function! On SDTV is mini-pic ok!)
please no oupdate perform because not finished for triplex and this would run an update of gm990!
other info:
Tunera = dvb-t
tunerB = sat1
tunerC = sat2
Tunera can switch in / etc / init.d / rcS between DVB-T and DVB-C:
insmod $ MODDIR/spark7162.ko Union tuner type = t # t = terrestical, c = cable
change and must be rebooted for tunerconfig again made! (default budget dvb-t)
flash manual / readme note (goes like any other jffs e2 img to flash!).
- Use fat32 formatted stick
- Folder "enigma2" Create stick
- E2jffs2.img + uImage in folder "enigma2" Copy
- Disconnect power from the triplex-box
- Usb-stick stuck in the rear usb slot
- Box again provide power while the front panel of the box "ok" key held down to "forc" appears in the display
- Now press the down arrow ("ittle" appears in the display)
- Now press the right arrow ("fact" appears in the display)
- Box is then flashed and it seems "U LD" in the display
The entire process takes a few minutes so be patient!
Quoted from "pinky1981"
here the first "beta to be regarded as" evo image
spark for the triplex (7162) box!
flashed wirds as Evolux!
This image is NOT for gm990 + co!
exclusively for GM TRIPLEX7162 boxes and identical as Amiko alien2 etc.!
imho is just e2pli!
it is a pure e2 image!
known bugs:
-spdif/coax seems flatly at least here via coax cable no sound!
ton so only via hdmi!
-On time of boot is wrong!
Please go down to once after firstboot box properly and start on a transmitter can be as ard / zdf the time of send them along!
-Please after firstboot vali-hd-nano skin change because this is the best!
(Mini-pic on hdtv is chopped shown in the skin which is not be harmful to the function! On SDTV is mini-pic ok!)
please no oupdate perform because not finished for triplex and this would run an update of gm990!
other info:
Tunera = dvb-t
tunerB = sat1
tunerC = sat2
Tunera can switch in / etc / init.d / rcS between DVB-T and DVB-C:
insmod $ MODDIR/spark7162.ko Union tuner type = t # t = terrestical, c = cable
change and must be rebooted for tunerconfig again made! (default budget dvb-t)
flash manual / readme note (goes like any other jffs e2 img to flash!).
- Use fat32 formatted stick
- Folder "enigma2" Create stick
- E2jffs2.img + uImage in folder "enigma2" Copy
- Disconnect power from the triplex-box
- Usb-stick stuck in the rear usb slot
- Box again provide power while the front panel of the box "ok" key held down to "forc" appears in the display
- Now press the down arrow ("ittle" appears in the display)
- Now press the right arrow ("fact" appears in the display)
- Box is then flashed and it seems "U LD" in the display
The entire process takes a few minutes so be patient!