ESX242 Dual Twin Lnbf

  • Thread starter Thread starter Guest
  • Start date Start date
Let me know how this works out. I have been considering this LNBF but I have held off until I heard more about it..

Thanks,
 
No problemo bud. I'd really like to see how it performs on circular c band sats to the east.
 
Lnbf arrived in the mail yesterday, think I'll slap it on and see if it makes a difference. One thing I can say, I've never seen a lighter lnbf before.
 
Hi Costact
Do you know if you can leave the dielectrac all the time on and still work ok on non circulars sats?? Or do you need to be installing on and off depending on which sat you're pointing???
regards my friend!!!
 
Carlos, you need to remove the plate for linear sats. Personally I have never used it, even on the circular sats. My lnbf still scans in most channels on circular sats without it, however most scan in on both polarities.
 
Back to the topic at hand, increased my signal quality by about 5%. I also noticed that the ESX242 lnbf is much closer to the dish then my previous feed.
 
I have one of these for my 6 footer. Still havent got it setup yet. There is no setting for skew on circular right?
 
Correct. No skew on circular because the signal is Left Hand or Right Hand circular polarized.
Linear signals travel in either the horizontal or vertical plane, and this is why you need skew.

Another thing to remember: You can get some circular signals with a linear lnb, providing the signal is strong enough. You can get some linear signals with a circular lnb, providing the signal is strong enough. EB
 
Last edited:
I used this lnbf strictly for linear sats without the plate. On the circular Atlantic sats most channels do scan in with the exception of most on Nss 806 at 40.5w. Great lnbf and I hope Colossus has success with it.
 
I reordered an esx 242 lnbf last week and received an e-mail that there may be additional charges for shipping, which I was expecting. I haven't heard a word from them so I sent an e-mail to them which came back immediately and all phone calls tell me that the numbers have been disconnected. I think Galaxy Marketing has gone bust, I hope the $29 I paid doesn't show up on my credit card bill. Damn, have to start looking all over again:

http://www.galaxy-marketing.com/
 
Costactc said:
I reordered an esx 242 lnbf last week and received an e-mail that there may be additional charges for shipping, which I was expecting. I haven't heard a word from them so I sent an e-mail to them which came back immediately and all phone calls tell me that the numbers have been disconnected. I think Galaxy Marketing has gone bust, I hope the $29 I paid doesn't show up on my credit card bill. Damn, have to start looking all over again:

http://www.galaxy-marketing.com/
Click to expand...

Sorry Costa, I never seen this Galaxy M has been gone for at least a few months. I would contact your CC people to let them know.

Someone needs to get that site shutdown so they are not taking any orders.
 
I am pretty sure I ordered a 6' WSI dish from there a few years ago. I will have to check my contact book and see if I can find any contacts there.
 
Back
Top