9500hdx decompression

dr.zin

dr.zin

maincode is just lzma compressed.
save maincode.bin to pc with rs232 loader/dump function,select maincode only.
rename maincode.bin to maincode.lzma after downloading.
extract maincode from .lzma with 7-zip file manager.
 
There is mention of security chip in maincode,maybe why certain menus don't work when firmware is loaded into openbox s10.Also factory test screen? maybe like the openbox has?
 
dr.zin said:
There is mention of security chip in maincode,maybe why certain menus don't work when firmware is loaded into openbox s10.Also factory test screen? maybe like the openbox has?
Click to expand...

I don't have the 9500, but so far from what Ive seen the ali chip boxes all have a test screen, just have to find the right buttons to press in the menu.
 
info screen 11111 is the bad news warning
warning pansat9500hdx (date) protection_ic fail
Like I mentioned before, probably why some menus don't work.
 
dr.zin said:
info screen 11111 is the bad news warning
warning pansat9500hdx (date) protection_ic fail
Like I mentioned before, probably why some menus don't work.
Click to expand...

Thank you for the interesting posts dr.zin..

I will upload these files in the Pansat files section so they don't get lost..
 
On a real genuine 9500hdx what does the 11111 screen show?
It seems I can scroll down on that screen but there is nothing else but the warning message
when loaded on the s10.
 
dr.zin said:
On a real genuine 9500hdx what does the 11111 screen show?
It seems I can scroll down on that screen but there is nothing else but the warning message
when loaded on the s10.
Click to expand...


EB may be able to help you with this.
 
We normally don't like posting files in any discussion threads..Links to the files would be better in most cases...this Is a unique thread and they fit in well with the discussion..The files are also posted in the file section with a notice for the use of Advanced testers..
 
On the s10 kludge I just get the warning and no factory menu.
11111 is for the legit s10 factory menu also.
rs232 test requires a loopback connector plugged into the rs232 receiver port,
judging from ascii I saw in the maincode.Don't know about it's wiring.
 
pansat file sze

pansat file size is 3.6meg,which I load via rs232 port.
If I backup firmware to usb once loaded it saves a 4meg backup.
I put the original 3.6meg firmware on usb and it doesn't show up
in the usb upload menu,only 4meg .abs files.
It that normal or is it because it's a bastard setup?
 
serit

serit or sharp,according to a chunk of maincode.
Code: 
00000000 4150 5009 696E 6974 206F 6B0D 0A00 0000 APP.init ok.....
00000010 5365 7269 7420 4172 696F 6861 2074 756E Serit Arioha tun
00000020 6572 206D 6F64 756C 650A 0000 5365 7269 er module...Seri
00000030 7420 5354 5636 3131 3020 5475 6E65 7220 t STV6110 Tuner 
00000040 6D6F 6475 6C65 0A00 5368 6172 7020 687A module..Sharp hz
00000050 3633 3036 2074 756E 6572 206D 6F64 756C 6306 tuner modul
00000060 650A 0000 4F53 445F 5333 365F 3100 0000 e...OSD_S36_1...
 
Back
Top