Openbox S10 goes to - - after booting

[TunaDude]

unplugging the box? nope he needs to re write back a firmware those lines mean something didn't go right when he added his tp prg list its happened to me nothing to di with a clone kill the program I use was called loader S900 its a eprom writer but if you want to unplug it for a day to try its still gonna be ---- in 24 hours 48 hours etc this can happen to anyone open box when ever they load a firmware or even there own tp prog channel list the box hiccupped..

[cpr43]

unplugging the box? nope he needs to re write back a firmware those lines mean something didn't go right when he added his tp prg list its happened to me nothing to di with a clone kill the program I use was called loader 5900 its a eprom writer but if you want to unplug it for a day to try its still gonna be ---- in 24 hours 48 hours etc this can happen to anyone open box when ever they load a firmware or even there own tp prog channel list the box hiccupped..




ok I fired up my other computer what you need is called loaderS900

STB AZ-Upgrade HD 2.00c 2009=5-22 this is what I use and have used to bring back the box! unless you walked my shoes and used this tool to bring back open box this re writes to the box when its in this stage of _____ make sure you check include boot loader and remember switch off in Theback to you hit start

Hey Tuna
Did you read his original post??? He already has the S900loader, he mentioned he already tried 50 TIMES!! Nothing is being written on all the issues related to Openboxes. I have 2 Solomend, 3 S9 and 3 S10 and you never know what is going to be. There are several tricks that I have heard including putting your Openbox inside your fridge for several hours.

Sometimes what you think can be fool it has solve others their problems and maybe in the future you end using the same trick. Welcome to the OPENBOX world!!

[TunaDude]

so what are you using gary? are you trying to re load your original firmware that has you hds2 dump is it taking the write?


not to insult you but are you powering down the box first then I guess the loader you use you add what you are gonna write to your open box and are you checking the add boot loader? does it have this feature in your loader program if not that could be an issue as why you have not had success yet