I already run prof 7500 with Azme on HDMU image. Works pretty well...must use high bit rate patch or wont get 30000 or higher symbol rate.
Need prof 7500.fw file..... load stv0900 package.....and dw2102 package.
Results 31 to 40 of 67
-
03-20-2016,09:56 AM
-
Post Thanks / Like - 2 Thanks, 0 Likes, 0 Kiss My Assel bandido, eastof111 thanked for this post
-
03-25-2016,09:50 PM
I am hoping they will make the update package available to HDMU. The STV090x and STB6100 are laready in the kernel. However even when you add the dvb-usb-tbsqbox-id5980.fw it will still not make the dvb_usb_tbsqbox2ci. Trying to get Tbs 5980 to work. any help is appreciated !!!!
-
03-25-2016,10:38 PM
What is the kernel version number? It must be 3.8 or higher....
-
Post Thanks / Like - 1 Thanks, 0 Likes, 0 Kiss My Assmountaineer thanked for this post
-
03-25-2016,11:35 PM
You may also try to put the firmware file for your device in lib/firmware, then manually load the modules listed below.
opkg update
opkg install kernel-module-stv090x
opkg install kernel-module-stb6000
opkg install kernel-module-tda10071
opkg install kernel-module-cx24116
opkg install kernel-module-stb6100
Device should be listed in console when you enter lsmod.
root@vuduo2:~# lsmod
Module Size Used by
ipv6 331884 28
rt2800usb 17562 0
rt2800lib 78027 1 rt2800usb
crc_ccitt 1067 1 rt2800lib
rt2x00usb 10274 1 rt2800usb
rt2x00lib 42623 3 rt2x00usb,rt2800lib,rt2800usb
mac80211 304949 3 rt2x00lib,rt2x00usb,rt2800lib
stb6100 5573 1
stv090x 66727 1
dvb_usb_tbsusb 23885 1
dvb_usb 17834 1 dvb_usb_tbsusb
fpga_directc 493 0
brcmfb 1590 2
dvb_bcm7424 9643938 29 brcmfb
procmk 1668 1 dvb_bcm7424
root@vuduo2:~#
-
Post Thanks / Like - 1 Thanks, 0 Likes, 0 Kiss My Assmountaineer thanked for this post
-
03-26-2016,08:30 AM
Thank you!
I just cant get the tda10071. Any ideas? Not listed anywhere in packet management or download. Is there another card that uses that besides TBS 5980?
Thanks!
-
03-26-2016,10:49 AM
opkg install kernel-module-tda10071
What message do you get when that command is entered in the terminal?.
.
.
Meine Dreambox One ist ein Stück Scheiße!.
-
Post Thanks / Like - 1 Thanks, 0 Likes, 0 Kiss My Assmountaineer thanked for this post
-
03-26-2016,11:00 AM
What kernel version are you using?
-
Post Thanks / Like - 1 Thanks, 0 Likes, 0 Kiss My Assmountaineer thanked for this post
-
03-26-2016,11:33 PM
3.92 kernel latest HDMU build also tried latest OPENATV build.
It says no package found...maybe it is not ready for other boxes??
-
03-26-2016,11:44 PM
This will probably take a while to be available in many different images. OpenATV also said "no package found" the last time I checked. Now the module packages are there, but the Kernel has not been patched. Keep checking and maybe it will be there one day. A TBS plugin will probably be available in downloadable plugins once all of the needed changes are made. You can get on the HDMU or OpenATV forum and request this item to be added. Doing that may help!
-
Post Thanks / Like - 1 Thanks, 0 Likes, 0 Kiss My Assmountaineer thanked for this post
-
03-29-2016,08:50 PM
Testing TBS blindscan in experimental image.
Command and Options List:
Blindscan tool for the Linux DVB S2 API
Modified by SatDreamGr for Enigma2
usage: blindscan-s2
-b : run blind scan
-T : Tune a specific transponder
-H : only scan horizontal polarity
-V : only scan vertical polarity
-N : no polarity
-i : interactive mode
-m : monitor signal mode
-M : monitor and re-tune each time
-a number : adapter number (default 0)
-f number : frontend number (default 0)
-F number : fec (default auto)
-s number : starting transponder frequency in MHz (default 950)
-e number : ending transponder frequency in MHz (default 1450)
-d number : delivery system 4=DSS 5=DVB-S 6=DVB-S2 (default 0)
-t number : step value for scan in MHz (default 20)
-R number : amount of times to try tuning each step (default 1)
-r number : symbol rate in MSym/s (default 16000)
-l number : local oscillator frequency of LNB (default 0)
-2 : enable 22KHz tone (default OFF)
-c number : use DiSEqC COMMITTED switch position N (1-4)
-u number : use DiSEqC uncommitted switch position N (1-4)
-U N.N : orbital position for USALS
-G N.N : site longtude
-A N.N : site latitude
-W number : seconds to wait after usals motor move (default 45)
-v : verbose
Testing on 87W Ku....
-
Post Thanks / Like - 1 Thanks, 1 Likes, 0 Kiss My Assmountaineer thanked for this postDaveLH liked this post