Ok, here I go again. I took delivery on a miniMe two weeks ago. After reading how poor the blind scan is, I was discouraged to even take it out of the box. Well today I did and have been screwing around with it for 3 hours and haven't seen one channel yet. Hmmnn.. the setup is difficult on this box and I'm sure I have several settings wrong.
Here are some screen shots of the setup menus.
Results 1 to 10 of 21
-
Anyone Have a AZ miniMe Figured Out Yet? – 12-15-2012,01:48 PM
Last edited by Pixl; 12-15-2012 at 02:46 PM.
-
-
-
12-15-2012,03:37 PM
Really nice graphics. The tuner setup looks a lot like the Engima2 setup.
-
-
12-15-2012,05:46 PM
Thanks for the pdfs. The LNB switch offset info helped me. I was having some problems using E2 where they call it switch threshold instead of offset..
-
12-15-2012,07:36 PM
i didnt see the bandstacked settings in there yet, i hear they are coming. But, with all those user programmable lnb settins, is it possible to use it with bandstacked also?
thanks
-
12-15-2012,07:47 PM
It would be better if they had some dedicated settings for bandstacked lnbs, but I have similar settings on a couple of receivers. Adjustable low and high settings for the lnb have allowed me to run a cband bandstacked Eagle Aspen, but I still had some problems with duplicate transponders & channels.
I wish there was more support for bandstacked equipment because IMO, it is much better technology than the legacy stuff. At least with receivers like these, we can get by with bandstacked lnbs. EB.
.
.
Meine Dreambox One ist ein Stück Scheiße!.
-
12-15-2012,09:32 PM
The MicroHD is is probably the best receiver for band stacked setup.
-
12-16-2012,06:08 AM
I am not happy with the micro's failure to keep 18 volts on both V and H Bandstacked settings. as of 12/16/12 cause someday i hope that can be fixed.
My openbox s9 does a far better job with c-band stacked .
I expand the scan settings,(micro) but in my opinion , that levels the playing field with all the rest that can do that.
This creates a tremendous problem. It is difficult to troubleshoot a problem when trying to operate within the confines of a known problem that can influence all the rest of the problems.
for this reason, i have been studying the new boxes and asking a lot of seemingly dopy questions on them.
My apologies for that.
I have my eye on that new AZbox. We will see what happens as pwsurge(?) said he was going to work on the bandstacked issue.