Thread: Optibox Anaconda Question Thread
Results 61 to 70 of 127
-
-
04-27-2012,12:44 PM
Now that didn't take long. It is the first tp that comes up. It is 4161V 29998. I scans it but when the receiver tries to scan the tp it locks up on it. I've also, always had problems bringing in 105. Both 103 and 107 are fine but 105 is very weak.
Optibox Anaconda, X2, OpenBox-S9, CS8000 and 2 X CW700S, 7 1/2' Perfect Ten scanning 55W to 139W C Band and a 39" Q-Sat scanning 30W to 125W Ku Band
-
-
Guest Guest
-
-
04-27-2012,01:04 PM
[QUOTE=Costactc;30885]That's too bad EC, the s2/8psk NBC channels are on that sat.
I managed to find that tp but it is very hard for me to get a solid lock on it. For some reason I have always found 105 hard to hold.Optibox Anaconda, X2, OpenBox-S9, CS8000 and 2 X CW700S, 7 1/2' Perfect Ten scanning 55W to 139W C Band and a 39" Q-Sat scanning 30W to 125W Ku Band
-
04-27-2012,01:19 PM
i can scan in NBC just cannot get this 3920.
-
04-27-2012,01:23 PM
Can't get it here either. Not a hint of action it.
Optibox Anaconda, X2, OpenBox-S9, CS8000 and 2 X CW700S, 7 1/2' Perfect Ten scanning 55W to 139W C Band and a 39" Q-Sat scanning 30W to 125W Ku Band
-
Guest Guest04-27-2012,02:11 PM
Ok I brought my receiver upstairs and hooked it up to my c band feed. All channels scanned in both manually and on a blind scan for that tp. I remember the first time I attempted 105w my box got stuck on tp 4160 as well, not quite sure why that issue hasn't arisen on my 2 last scans:
[Only registered and activated users can see links. ][Only registered and activated users can see links. ][Only registered and activated users can see links. ]
-
Guest Guest