Thanks, bud, did a reboot and went back to G17 and blind scan is now working fine. The more I see of the box, the more I like it.
Thread: Optibox Anaconda Question Thread
Results 51 to 60 of 127
-
04-25-2012,02:04 PMOptibox Anaconda, X2, OpenBox-S9, CS8000 and 2 X CW700S, 7 1/2' Perfect Ten scanning 55W to 139W C Band and a 39" Q-Sat scanning 30W to 125W Ku Band
-
04-27-2012,08:51 AM
TP Problem trying to scan 3920-V-30000 s/2 5/6 8psk on 105 got a 84% signal it will scan half way and lock up.
-
Guest Guest04-27-2012,09:23 AM
-
-
04-27-2012,09:56 AM
i was scanning tv only and all on manual scan
-
-
04-27-2012,11:04 AM
tried a blind scan again it locked up on the first tp 4001-v-29999
-
04-27-2012,11:31 AM
Try changing the parameters so that your scan does not go above 4000. Nothing above that, that isn't encrypted. I had the same problem on another sat with tp 4161 and stopping below it solved the issue.
Optibox Anaconda, X2, OpenBox-S9, CS8000 and 2 X CW700S, 7 1/2' Perfect Ten scanning 55W to 139W C Band and a 39" Q-Sat scanning 30W to 125W Ku Band
-
04-27-2012,12:26 PM
I appreciate these problems being posted where we can see them. They have promised to work on the blind scan issues.
EC, If the receiver is hanging on a blind scan, I would like to know what satellite and what transponder(s) it hangs on. Hopefully there will be a pattern so we can understand the problem better. EB.
.
.
Meine Dreambox One ist ein Stück Scheiße!.
-
04-27-2012,12:33 PM
The main reason I didn't post it, EB was that the tp it hung up on was well above the highest tp listed with Lyngsat. It just seem very strange that it found such a high tp. I wil try to find it again. If memory serves correctly it was tp 4161 on 105. I'll move the bud over and run a blind scan right now.
Optibox Anaconda, X2, OpenBox-S9, CS8000 and 2 X CW700S, 7 1/2' Perfect Ten scanning 55W to 139W C Band and a 39" Q-Sat scanning 30W to 125W Ku Band