You can install drivers and all the stuff needed to support the device, but it will not work if the receiver does not know what the device is or what it is supposed to do! I suspect this may be the problem.
Here is one reason why the driver is listed in enigma2 feeds, but does not work:
There has not been any interest in ATSC enigma2. No one in North America has shown much of a desire to test anything or to make any improvements in enigma2. ATSC works well for me with the 850 and that is all that matters! Lol. I will see if we can get the help that is needed to make the 955 work if you are interested.
Thread: ATSC For Enigma2 (TEST)
Results 101 to 110 of 142
-
09-13-2017,09:49 AM
-
Post Thanks / Like - 1 Thanks, 0 Likes, 0 Kiss My AssViP3R thanked for this post
-
09-13-2017,12:53 PM
Hello EB
Yes I will Be interested if they can make it work, since the drivers are there already, yes ask your friends some questions and see if is going to be be a long process.
Let me know.
Chewie
-
09-13-2017,01:21 PM
It will take as long as it takes. That is all I know to say. Buy an 850 if you are in a big hurry.
Please list the output of lsusb as mentioned earlier. Thanks..
.
.
Meine Dreambox One ist ein Stück Scheiße!.
-
09-13-2017,08:17 PM
Hello EB
I try the commend by telnet and there is no output, I try the tuner on the VU+, same thing, neither receiver is seeing the tuner.
Chewie
-
Post Thanks / Like - 1 Thanks, 0 Likes, 0 Kiss My Assel bandido thanked for this post
-
09-13-2017,08:40 PM
The telnet command "lsusb" lists usb devices that are connected to the receiver. It may help to see how yours is listed in the receiver.
Remove power to the receiver.
Insert the 955 usb device into the receiver.
Power On the receiver.
Connect to the receiver using telnet.
Type "lsusb" in the telnet window.
Post the output.
Here is an example:
root@sf4008:~# lsusb
Bus 004 Device 002: ID 1a40:0101
Bus 001 Device 001: ID 1d6b:0002
Bus 002 Device 001: ID 1d6b:0003
Bus 003 Device 001: ID 1d6b:0002
Bus 004 Device 001: ID 1d6b:0002
Bus 005 Device 001: ID 1d6b:0001
Bus 006 Device 001: ID 1d6b:0001
Bus 004 Device 003: ID 2040:b123
Bus 004 Device 004: ID 2040:7240
Bus 004 Device 005: ID 05e3:0610
Bus 004 Device 006: ID 2040:7240
Bus 004 Device 007: ID 0bda:2838
Bus 004 Device 008: ID 2040:7240
root@sf4008:~#
-
09-13-2017,10:06 PM
Hello EB
Here is the output.
Regards.
Chewie
-
Post Thanks / Like - 1 Thanks, 0 Likes, 0 Kiss My Assel bandido thanked for this post
-
09-14-2017,03:07 PM
The device ID is correct in your list. Let's see if we can get some help with this.
-
09-14-2017,03:20 PM
Thanks EB, I was talking to the VIX Guys, and they said is Best to install by command line, that will show any errors. what ever this means.
I think they are asking to install the drivers Manually and see if there is any errors.
Let me know what you find out.
Regards.
Chewie
-
09-14-2017,05:35 PM
User driver installation is not the problem or issue.
VIX is a Great Good Group of people, but as far as I know, they do not know about or do any ATSC development work in the enigma2 system. Let's talk to the people that did the ATSC install work instead!
-
Post Thanks / Like - 1 Thanks, 0 Likes, 0 Kiss My AssViP3R thanked for this post
-
09-14-2017,06:52 PM
Right on EB, let me know what you find.
Regards.
Chewie
-
Post Thanks / Like - 1 Thanks, 0 Likes, 0 Kiss My Assel bandido thanked for this post