i do not know what is going on now i am trying to blind scan 95w C-Band and it will not let me change the frequency to c- band and it is set up right i deleted the blind scan plug in and installed it again but it did not help
Thread: Another problem
Results 1 to 10 of 25
-
Another problem – 04-26-2015,01:28 PM
-
04-26-2015,01:40 PM
How many tuners are you using? Do you have separate tuners for C and Ku bands?
.
.
.
Meine Dreambox One ist ein Stück Scheiße!.
-
04-26-2015,01:45 PM
I have not had any issues scanning c band on Galaxy 3c at 95w, but this is one of those sats where it does miss tp. I'm moving both my dishes over to scan each band individually. Tuner A is ku and tuner B is c band.
-
04-26-2015,02:04 PM
Please list the transponders it misses.
-
04-26-2015,02:07 PM
yes separate tuners for C and Ku turner a is Ku and B is C-Band
-
04-26-2015,02:27 PM
No issues on either band and I must say that my solo2 didn't miss any tp and scanned in several feeds-awesome stuff:
[Only registered and activated users can see links. ][Only registered and activated users can see links. ][Only registered and activated users can see links. ][Only registered and activated users can see links. ]
-
04-26-2015,02:37 PM
Carefully check your antenna settings. I think you will find LNB 1 for tuner B has been assigned an universal lnb for one of the satellites in the satellite list. This error can be found in the receiver or by looking at the settings file.
You can upload your settings file in etc/enigma2 and attach it here IF you have not connected to any social media such as Facebook, OR IF you have not connected to any other place that requires a password. Facebook and other INTERNET passwords are stored in the settings file.
You can use a different LNB number if you want to run C and Ku bands in a single tuner. Here are some screenshots showing C and Ku bands on Tuner A.
-
04-26-2015,02:39 PM
Excellent Costa! See if it will blindscan the 11804H 1250SR transponder on 87W Ku.
-
04-27-2015,04:40 AM
my sat list got corrupted real bad some how so i had to delete everything make a new sat list and start over
-
04-27-2015,05:01 AM
Make back-ups. Then all you would need to do is reload the back-up.