Trying to set up my sat list with Clarke Tech Editor i have got it done except i have not figured out how to change positions from e to w anybody got a idea how.
Thread: Sat List
Results 1 to 6 of 6
-
Sat List – 06-11-2014,04:38 AM
-
06-11-2014,11:39 AM
It took me a while to figure that one out as well Rodder until my buds across the pond told me that since there are 360 degrees to cover the earth that you must input the correct degee in east and when you choose to enter another sat you will see it changing to west. For example, Hispasat at 30w would be 330 degrees east. Those numbers decrease as you enter sats to the west and increase as you enter sats to the east.
-
Post Thanks / Like - 1 Thanks, 0 Likes, 0 Kiss My Assrrob311 thanked for this post
-
06-11-2014,11:42 AM
Thanks Costactc i would have never figured that out.
-
06-11-2014,03:15 PM
It took me a while also and make sure you check your list before flashing to your d15. Some of those sats like 107.3 and 116.8 can use a bit of maths to figure out, especially if your planning on using usals.
-
06-12-2014,08:29 AM
I have to say this is a real nice receiver. After Costactc pointed me in the right direction to set up my sat list it is working great i would say it is like a Anaconda but with a good blind scan.
-
Post Thanks / Like - 0 Thanks, 1 Likes, 0 Kiss My Assrrob311 liked this post
-
06-12-2014,11:48 AM
If its tuner was as sensitive as my F15, TM5302 or X2 it would have remained on my starting line up. I find it the best for blind scanning and the menu is extremely user friendly.