Here is a screencap of the SX88 PVR Menu:
[Only registered and activated users can see links. ]
If your PVR menu is missing some of the entries, then download and install the firmware in the link.
[Only registered and activated users can see links. ]
Do a factory default after updating the firmware.
I will be glad to upload a satellites.xml for North America if it is needed.
Thread: Octagon SX88 PVR Menu
Results 1 to 10 of 30
-
Octagon SX88 PVR Menu – 12-30-2017,12:17 AM
-
Post Thanks / Like - 4 Thanks, 0 Likes, 0 Kiss My Ass
-
12-30-2017,02:54 PM
hey el bandido thanks for the help i have the pvr now ...now i just don't have to satellite of the west satelline no more can you help
-
Post Thanks / Like - 1 Thanks, 0 Likes, 0 Kiss My Assel bandido thanked for this post
-
12-30-2017,03:19 PM
Sure.
What satellites would you like to have in the satellite list?
-
12-30-2017,03:41 PM
now with the new file it shuttering or what you call jumping on the picture . on all channels.bad . the satellites i like to have ro 30.0 30w5---139w amc 8
-
Post Thanks / Like - 1 Thanks, 0 Likes, 0 Kiss My Assel bandido thanked for this post
-
12-30-2017,05:07 PM
Set the picture resolution to the correct setting for your tv and the jerking should stop.
There are some channels on 101West c band that jerk all the time, but the others should not jerk!
-
12-30-2017,05:38 PM
ok thanks i thank it good now ok do you have the sstellite list or do you have to work on it . so far i like this box now that you are working it.
-
12-30-2017,07:02 PM
The satellite list is not a problem.....Just need a bit of time to get it and upload it.
-
-
12-31-2017,12:33 PM
Here are a couple of things to know about the SX88.
The channel and satellite file for the SX88 may be used in the Octagon SF4008, or the channel and satellite file for the SF4008 may be used in the SX88.
A regular satellite scan in the SX88 will automatically delete any transponders with no signal.
-
12-31-2017,04:39 PM
ok what am i doing wrong now. the satellite file you give me wont go in the sx88 when i unzip the the file and put it on the formated usb stick put it in the box it reads fine in media and wont work in there neither. but when i go to firmware update it wont read it it says there is no file. is there another way i dont no about, thanks el bandido.