What are the l.o. frequencies of the lnbs? You have several different ones listed in your settings. There should be only 3 lnb types for our fta:
C Band = 5150
Universal = 9750/10600
Circular = 10750
Results 11 to 20 of 35
-
09-07-2017,05:10 PM
-
09-07-2017,06:04 PM
I also need the satellites.xml file that you are using with these settings. Please send it.
.
.
.
Meine Dreambox One ist ein Stück Scheiße!.
-
09-07-2017,06:18 PM
I have several stacked lnb's. One I use I set it for 13850 so the H freq are correct and the V are off...use it for SES3 NBC...I actually fixed that one just now by changing it to 10750 and adjusting the freq of the H tps. Now that slot works!
i think it is in the communication between receiver and switch by 2.0. I think in that communication the switch sees the LO and the TPs from the database..it then calculates if that is correct or not and turns the 22 on or off to compensate.
seems it is all on the stacked lnbs....so it is the switch compensating somehow...
-
09-07-2017,06:42 PM
I guess what we need is this:
A settings file with all satellites deleted except for the satellites used by the problem switch.
A list of lnbs that are used with this switch and the proper l.o. frequencies (please include lnb make/model).
The exact satellites.xml file that is being used with this switch.
I think we can get it to work properly. Am just having a very hard time understanding the settings file without knowing what is supposed to be controlled by it..
.
.
Meine Dreambox One ist ein Stück Scheiße!.
-
-
Post Thanks / Like - 1 Thanks, 0 Likes, 0 Kiss My Assel bandido thanked for this post
-
09-07-2017,10:48 PM
Your settings file breaks down like this:
lnb=1 lnb.1.lof=c_band
2230.tonemode=off
2250.tonemode=off
2270.tonemode=off
2290.tonemode=off
2330.tonemode=off
2350.tonemode=off
2370.tonemode=off
2390.tonemode=off
2410.tonemode=off
2432.tonemode=off
2470.tonemode=off
2489.tonemode=off
2550.tonemode=off
2590.tonemode=off
2630.tonemode=off
2650.tonemode=off
2669.tonemode=off
2690.tonemode=off
2710.tonemode=off
2730.tonemode=off
2770.tonemode=off
2820.tonemode=off
2880.tonemode=off
2990.tonemode=off
3019.tonemode=off
3030.tonemode=off
lnb=2
2329.tonemode=on
2369.tonemode=on
2431.tonemode=on
2451.tonemode=on
2469.tonemode=on
2488.tonemode=on
2526.tonemode=on
2549.tonemode=on
2589.tonemode=on
2610.tonemode=on
2668.tonemode=on
2709.tonemode=on
2750.tonemode=on
2769.tonemode=on
2879.tonemode=on
3300.tonemode=on
lnb=3 lnb.3.lof=c_band
2527.tonemode=off
2608.tonemode=off
lnb=4
2349.tonemode=on
lnb=5 lnb.5.lof=circular_lnb
2389.tonemode=off
lnb=6 lnb.6.lof=user_defined = 13850
2569.tonemode=on
lnb=7 lnb.7.lof=circular_lnb
2629.tonemode=on
lnb=8
2729.tonemode=on
lnb=9 lnb.9.lof=circular_lnb
2649.tonemode=on
lnb=10 lnb.10.lof=user_defined = 10750
2689.tonemode=off
lnb=11 lnb.11.lof=c_band
2570.tonemode=off
lnb=12 lnb.12.lof=circular_lnb
2409.tonemode=off
END
-
Post Thanks / Like - 1 Thanks, 0 Likes, 0 Kiss My Assmountaineer thanked for this post
-
09-07-2017,10:49 PM
Notice that lnbs 2,4, and 8 are not defined?
You have all of this running through one switch????
-
Post Thanks / Like - 1 Thanks, 0 Likes, 0 Kiss My Assmountaineer thanked for this post
-
09-08-2017,05:52 AM
lnbs 2,4,8 are universal, and you are running them with 22KHz ON. Are the non-working satellites on these switches? (Subtract the orbit positions in the post#16 list from 3600 to get the correct orbit listing. I.E. 3600−2409 = 1191, Or 119.1 West)
Have you tried using Band for the 22KHz tone setting with the universal lnbs? The 22KHz tone will come on automatically for anything above 11700 MHz when Band is selected.
Have you tried using Diseqc 1.1 commands to control the 8 positions in this diseqc switch?
Have you tried using ToneBurst A and ToneBurst B in series with other Diseqc 1.0 settings?.
.
.
Meine Dreambox One ist ein Stück Scheiße!.
-
Post Thanks / Like - 1 Thanks, 0 Likes, 0 Kiss My Assmountaineer thanked for this post
-
09-08-2017,06:32 AM
Looks like there are 3 lnbs assigned to each Diseqc 1.0 port.
lnb.1.commitedDiseqcCommand=AB (port 2)
lnb.2.commitedDiseqcCommand=AB (port 2)
lnb.3.commitedDiseqcCommand=AA (port 1)
lnb.4.commitedDiseqcCommand=AA (port 1)
lnb.5.commitedDiseqcCommand=BB (port 4)
lnb.6.commitedDiseqcCommand=BB (port 4)
lnb.7.commitedDiseqcCommand=BA (port 3)
lnb.8.commitedDiseqcCommand=AA (port 1)
lnb.9.commitedDiseqcCommand=AB (port 2)
lnb.10.commitedDiseqcCommand=BA (port 3)
lnb.11.commitedDiseqcCommand=BA (port 3)
lnb.12.commitedDiseqcCommand=BB (port 4)
E2 Diseqc Commands =
Sat1........A/A
Sat2........A/B
Sat3........B/A
Sat4........B/B
(Note: The switch is only designed for 8 lnbs Max.)
-
Post Thanks / Like - 1 Thanks, 0 Likes, 0 Kiss My Assmountaineer thanked for this post
-
09-08-2017,06:41 AM
Yes I have tried toneburst to no effect.
i think the issue is that diseqc 3 and 4 containing inputs 9-16 is designed for quatro lnbs. I have stacked individual lnbs on those. I use H for one whole sat and V for another whole sat...in my dish farm. What is happeneing is that because the switch/multiswitch is Diseqc 2.0 it is testing signal and seeing range of lnbs and changing its own settings based on what it is "hearing" from the lnb's. What I mean is that it detects the wider range of the stacked lnb's and assumes they are universal and tries to adjust its 22 settings accordingly. This overrides the "normal" settings in the switch. SO it turns on 22 for certain ports and off based on what it thinks is the configuaration.
Now this does not happen with 1 and 2 and their ports 1-8...they are designed to be used with dual or quattro lnbs. So it seems to leave those alone with the stacked lnb's..I think
So my setup as of now is the following
Command V/H 22 sat
1 V off 107.3 Cband (V only) Regular Cband LNB STATIONARY CBAND DISH
1 H Off 99 W Cband H only reg Cband Lnb STATIONARY CBAND DISH
1 V ON 125 KU V Only UNiversal LNB set to universal setting
1 H ON 87 KU H only UNiversal LNB set to universal setting
NUMBER1 all work correctly
2 V Off 97 Cband Reg Cband LNB MOVEABLE CBAQND DISH
2 H Off 97 Cband Reg Cband LNB MOVEABLE CBAND DISH
2 V ON KU Moveable Dish V Only Universal LNB Set to universal MOVEABLE KU DISH
2 H ON 95 KU STACKED KU LNB 10750 LO
2 All work correctly
3 V OFF 91 KU STACKED KU LNB LO set 10750
3 H OFF 103 Cband STACKED CBAND LNB 5150 LO set
3 V ON 97 KU STACKED KU LNB LO set 10750
3 H ON EMPTY
91 ku AND eMPTY DO NOT WORK CORRECTLY 22 TONE IS WRONG AND DOESNT ALLOW ACCESS TO PORTS.
4 V off 119 KU 10750 LO (special 118 and 119 LNB)
4 H OFF 119 KU 10750 LO (special 118 and 119 LNB)
4 V ON 121 KU STACKED LNB Set 10750 LO
4 H ON 103 KU STACKED LNB Set 10750 LO
119 ku ports do not work as 22 is stuck ON on all ports.
I have one stationary Cband dish with 2 lnbs on it...I take the H from one and the V from the other because the channels I want are only on thos polarities (99 H 107.3 V)
I have a moveable Cband Dish
-
Post Thanks / Like - 1 Thanks, 0 Likes, 0 Kiss My Assel bandido thanked for this post