Using the April 9, 2013 software as noted earlier. Tried to a couple of times to set the "Date and Time", but later I noticed that it reverts to a random and oddball time and date. Has anyone else noticed this happening, or is it just me doing something wrong in the time setting procedure.
carlospr43 mentioned and had an attachment for the Satellite and channel list for the USA folks, is that the Satellite and channel list already built into the April 9 revision or is that a different list. Always asking questions and learning at the same time LOL!!!
Thanks.
,
Thread: X2-Premium-Special-Edition
Results 51 to 60 of 60
-
06-24-2013,10:21 AM
-
-
06-24-2013,03:33 PM
Done!! File available at the files section!
X2 Premium III HD, Openbox X5/ S10, Gsky V3/V6, iSmart m100
-
11-24-2014,01:45 AM
Other than the case design, is there a difference between the X2 Premium and the Premium II? My premium II will no longer start up past the X2 logo screen, and I tried using the bootloader posted here and it still will not boot.
GEOSATpro HDVR3500 (Fortec Star 90cm dish/Ku-band LNBF: aimed at 97.0°W, Wave Frontier Toroidal Dish w/multiple Ku-band LNBFs, aimed at 91°W, 95°W, 105°W, 113°W, 121°W, 125°W - Mini BUD: Primestar/ChannelMaster dish/C-band LNBF: receiving 97.0°W & 99.0°W
Other Toys: Mac mini (Early 2009) w/OS X El Capitan 10.11.4 Public Beta 7, iPhone 4S 64GB w/iOS 9.3 Public Beta 7, iPad 2 64GB (Wi-Fi/3G) w/iOS 9.3 Public Beta 7, AppleTV (3rd Gen) w/Apple TV Software 7.2.1, OS Build Version 8.4.1
-
11-24-2014,05:33 AM
Both models used different chips, different firmwares etc. They are a completely different boxes. If using the correct bootloader for the PII make sure no cable is connected it to the box (HDMI, RCA or ethernet). Only the null cable to your PC and the right file (326sz_v33_1024.r1689.flash.gz.gro.stp). Sometimes it tooked me several attempts to make it. If time out screen show up you need to start all over again.
X2 Premium III HD, Openbox X5/ S10, Gsky V3/V6, iSmart m100
-
11-24-2014,12:10 PM
as long as the receiver boots the rs232 method should work fine
-
11-18-2015,04:51 PM
I haven't flashed a file to my X2 in quite some time, just wondering what way to do it. I don't want to brick it like I did my III.
-
-
Post Thanks / Like - 1 Thanks, 0 Likes, 0 Kiss My AssCostactc thanked for this post
-
-
11-19-2015,04:41 PM
Use all code & boot code
X2 Premium III HD, Openbox X5/ S10, Gsky V3/V6, iSmart m100
-
Post Thanks / Like - 1 Thanks, 0 Likes, 0 Kiss My AssCostactc thanked for this post