Last updated drivers which says "Fix dual tuner problem(duo2)". This version is newer than VIX 808 release.
How to update Duo2 drivers....
Use Filezilla and go to /lib/modules/3.3.8-2.0/extra
and backup the existing drivers to your PC for safety.
Unzip the latest Duo2 modules file and copy them to
/lib/modules/3.3.8-2.0/extra over writing the old ones.
Reboot.
Upgraded mine but haven't had a chance to check all tuners.
Thread: Drivers for Duo2
Results 1 to 6 of 6
-
Drivers for Duo2 – 01-07-2014,09:13 PM
-
03-16-2014,01:07 AM
Depending on the age of you'r image, you may already be running these or latter drivers, you can check in your image by going to menu> information> about ( this will show the drivers that were bundled with the image when it was built, it will not change even if you manually update the drivers.
When manually loading drivers it is advisable to always place enigma into sleep mode first using a telnet session and the init 4 command, you can reboot the receiver once the drivers have been transferred using the init 6 command.
20140310
Code:- Fix PCM MultiChannel problem(solo2, duo2) - Fix vtuner PIP - Fix Dual tuner loop-through input from single tuner(duo2, ultimo)
Code:- Support blindscan(solo2, experimental) - Support both SCART & HDMI audio in passthrough mode.(uno, ultimo, solo2, duo2) - Fix no audio problem in some radio channels - Support PCM Multi Channel(solo2, duo2) - Fix timeshift problem - Fix loop through problem (duo2, single tuner) - Support dynamic contrast in PEP - Turn on PQ Enhancement by default - Add more PQ enhancement proc entries(solo2, duo2) - Fix vtuner problem when RestartGUI - Fix some CI modules recognition problem
-
03-16-2014,05:15 AM
20140316
Code:- Fix DDP problem(duo2, solo2)
-
03-18-2014,01:52 AM
20140318
Code:- Fix dual tuner lock problem(duo2, uno, ultimo) - Fix PCM multichannel from standby(duo2, solo2)
-
04-03-2014,06:08 AM
Update drivers
20140403
- Fix audio problem(duo2, solo2)
-
04-24-2014,10:34 AM
update driver
20140424
- Fix multichannel audio problem(solo2, duo2)
20140418
- Fix DVB-S2 Single(AVL6211) tuner problem(duo2, ultimo)
- Change nim_sockets of DVB-T2 tuner(duo2, needs a E2 update)