I have tried most all firmware ver. it will record and then comes up with a fast message something is to slow and stops recording. Does it in TS and PS.
using anonymouSX V2b-0481cmt
Results 1 to 7 of 7
-
Problem stops in the middle of recording – 12-03-2012,01:24 PM
-
12-03-2012,02:22 PM
I had that problem with my S9 when using it with a no-name usb HD enclosure. Seems to be a timing problem in the usb port and firmware . It did work properly with an earlier version of the firmware, but then again, the early gremlins returned. This problem materialized when I started upgrading to newer versions. Finally solved it by just buying a Seagate Free Agent GoFlex Drive.
-
12-03-2012,03:28 PM
Gary what kind of storage device are you using?
Portable Comtech 13', Winegard 10', SAMI 7.5', 3 39" Ku dishes one motorized. Scanning 30w-131w
-
12-04-2012,08:53 AM
I am using a cheap China usb to sata adapter, but it works good with the X2 hd reciever.
-
12-04-2012,12:33 PM
Prior to the Seagate, I tried three other no-name made in China enclosures and they did not work on my S9 prior to the firmware updates. When I connected them to my Sonicview 8000 HD and Raptor the no-names worked just fine.
Last edited by eastof111; 12-04-2012 at 12:38 PM. Reason: Typed in wrong model #
-
12-04-2012,02:22 PM
thanks good to know that it is not just my receiver.
Gary
-
12-04-2012,03:44 PM
I honestly have never recorded with my S10 because it was broken forever. I am currently able to record with my 1tb Hitachi drive with no issues now that the receiver is fixed.
Portable Comtech 13', Winegard 10', SAMI 7.5', 3 39" Ku dishes one motorized. Scanning 30w-131w