Will this work?
I have my KU dish & C Band dish . I want to run both to a DiseqC switch my KU to LNB1 & C Band to LNB2 then run one line into the house, will this work?
Thread: Will this work?
Results 1 to 5 of 5
-
Bellboy GuestWill this work? – 04-26-2012,05:44 PM
-
04-26-2012,06:48 PM
Bellboy
Do you run a motor or your Dishes are fixed?? If they're fixed then you can add up to 4 LNBs to the diseqc switch and Yes, they can be a mixed of KU and C band together.
-
-
Guest Guest04-27-2012,09:31 AM
As long as your dishes are being moved by seperate stand alone positioners then you shouldn't have any problems with that. For example, if port 1 is your c band dish then you would have to tell your positioner where to send the dish and visa-versa for the other dish. I'm not a switch expert though BB, it would good to see others chime in on this one.
-
06-05-2012,06:59 PM
having a coax for each dish will keep the switching simple. I have a SV8000hd and have 6 LNB's wired to it. It has a 4 port Disqc and 22khz 2 port switches. could have used the positioning trick but this works ok. Bud c-ku,and ku dishes.