I agree with EB on your most southern sat and your outer edge sats. Don't expect perfection on all 3 but a happy middle ground where signal quality is good. Seeing that my arc is from 11-127w, I use Amc6 at 72w as my southern sat and Intelsat 805 at 55w as my eastern sat(I don't like fine tuning with circular sats) and finally Galaxy 23 at 121w for my western side. Once those are scanned in well, all other sats should fall in place.
Thread: 71/2' C band mesh dish
Results 11 to 20 of 36
-
Guest Guest02-23-2012,09:56 AM
-
Bellboy Guest03-11-2012,07:09 AM
Well I'm on my own setting this dish up. The problem I'm have now is how to install the Actuator to the dish. I have know Idea how it is suppose to mount. I lost Hockeynut's help so I'm on my own
[Only registered and activated users can see links. ] [Only registered and activated users can see links. ] [Only registered and activated users can see links. ][Only registered and activated users can see links. ] [Only registered and activated users can see links. ]
-
Guest Guest03-11-2012,07:31 AM
I'd like to help you out bud but I'm taking off on vacation. It looks fine in your pics, have you actually set up the actuator wires with the positioner?
-
Bellboy Guest
-
03-11-2012,08:49 AM
Here are some pics of mine, BB. It is a 7 1/2', as well. Hopefully they will show up ok
Optibox Anaconda, X2, OpenBox-S9, CS8000 and 2 X CW700S, 7 1/2' Perfect Ten scanning 55W to 139W C Band and a 39" Q-Sat scanning 30W to 125W Ku Band
-
03-12-2012,10:13 AM
It looks like you have the actuator installed correctly. There are only two connections and it looks like everything is ok. Put power to it and see if it moves the dish.
.
.
.
Meine Dreambox One ist ein Stück Scheiße!.
-
-
Bellboy Guest
-
Guest Guest
-
Bellboy Guest03-23-2012,09:59 AM
Got everything hooked up.
Costa What setting do I use for that LNBF U sent me. Trying to setup arc now.