Discuss this Topic here.
Results 1 to 10 of 25
-
X2 EZ-Manage Tool Editor - Discussion – 04-05-2013,12:27 PM
-
04-05-2013,02:54 PM
Mission accomplished!! Still some small issues to work but its a great milestone.
X2 Premium III HD, Openbox X5/ S10, Gsky V3/V6, iSmart m100
-
04-06-2013,02:22 AM
To me still write:
Error3346:Number of query values and destination fields aren't the same.
-
04-06-2013,07:40 AM
Need to make sure you are using latest firmware, and you have done a factory reset , does not work on back up of old firmware. I have uploaded a db and user db you can start with db works best. Load new firmware than the db I uploaded it is the march 30 updated sat list. I have found it works good using it to load with serial cable. You can only open data base and user db with the editor.
-
04-06-2013,08:58 AM
I'm using the latest firmware. DB write to USB, as it is written in the instructions. Still not working. Writes: Error3346: Number of query values and destination fields aren't the same. And using serial cable, to edit channels, is idiotic.
Most ugliest channel editor from all which have ever used.
-
04-06-2013,09:48 AM
Hey Guys
Why not to explain what you people are doing in a completed way and in english!! Are you using any secret code to communicate??? I can't hardly understand what your problem are?? I have made many database backups copies to my USB. I have open all of them using EZM v1.0.7 and able to see my channels, sats, TPs etc etc.
Using March 30 2013 firmware. USB formatted to FAT32. When the Error3346 is happening??? When doing the database backup to your USB?? Or when trying to open the saved database with the EZM??X2 Premium III HD, Openbox X5/ S10, Gsky V3/V6, iSmart m100
-
04-06-2013,11:06 AM
When trying to open the saved database with the EZM.
-
04-06-2013,11:29 AM
Make sure the USB is formatted to FAT32. Copy what you have in it to a temp file in your computer. Format the USB to FAT32 and make a new database backup. Also, make sure you have March 30 firmware and EZM version v1.0.7. Try to open the file again
X2 Premium III HD, Openbox X5/ S10, Gsky V3/V6, iSmart m100
-
04-06-2013,11:46 AM
It is a rather cumbersome editor to use, but then again, it's a FREE program.
-
04-06-2013,12:31 PM
All manufacturers of receivers have free channel editor.