I was going to hook up my OpenBox S10 the other day and to my discovery there is no manual and the cord end is European? . . . ? I found a manual online for the S10(have not yet read).
1. Looking at the back of the S10 the voltage states 100-250V, so am I to assume that all that is needed, is a European to North American adapter?
2. In the specs the S10 states it will handle DiSEqC and 22K switching. Will it handle Legacy(SW21) switching?
3. As this is a European box, will I need some firmware updated with NA sat info, or any other files?
4. Will I have trouble outputting sound for AC3 dolby channels via the RCA(Red/White) as this box does not have a S/PDIF output only HDMI? I ask because I do not have a A/V receiver that handles HDMI.
5. Anything else that is important that I left out, please let me know?
Thanks in advance!
WillDekkard
Until I get an adapter for the power cord, I can not play with the settings of this box - lol.
Thread: Openbox S10 Questions
Results 1 to 5 of 5
-
Openbox S10 Questions – 07-12-2011,10:58 PM
-
07-13-2011,04:21 AM
See if this helps....[Only registered and activated users can see links. ].
At the bottom it also says to specify when ordering weather you need a european or north american plug..... As far as the other specs, they are listed. As far as the adapter goes.... check these out...
Enercell™ Universal Grounded Adapter Plug - Foreign to U.S. - RadioShack.com
Hope this helps. Have a great day!
Note: I also found this..... "Video and audio output is simple now: HDMI or composite (analog 480i) output. There is no component (Y/Cb/Cr) outputs. There is also no S/PDIF output. Dolby/AC-3 is either thru HDMI or thru the RCA red & white jacks."
I also found that the sound you want is only through the HDMI as far as getting true dolby sound. It does appear however that the box will decode the ac3 and still send it through the red/white rca plugs
Looking around I have seen a couple of pics of the rear. A pic of yours would help to identify exactly what you have. I have seen scart connections, No scart connections.
I unfortunatly don't have an openbox. looking around however that is what I was able to find.Last edited by stone1150; 07-13-2011 at 04:47 AM.
-
-
07-13-2011,06:00 AM
1. Either an adapter or cut and replace the plug.
2. No. It will not handle a SW21.
3. We have NA updates here. All you need to do is update the satellite file(.dbs).
4. AC3 audio Is transmitted through the RCA cables.
5. Let us know if you need anything else. EB.
.
.
Meine Dreambox One ist ein Stück Scheiße!.
-
07-13-2011,08:12 AM
Thanks to all of you for your helpful information. Unfortunate that it won't handle SW21 switch, oh well, I'll just have to modify the switches to that feed for the S10.