Good Morning to you all.
I update My VU+ DUO2 last week and had Open ATV firm, after I try to scan C-BAND channels, I noticed that the Blind Scan only looks for KU BAND transponders, check my tuner Config. and is fine, try different Sat's and the same thing.
I had OpenDroid on my USB Multiboot, loaded it this had an older version of software not to old is Opendroid 5.5, I did a blind scan for c-band and no problems, I decided to update the software and after the update I try to scan again and only looks for KU-BAND transponders, loaded the latest from Openspa, same thing.
Finally I loaded the VIX last build from 8/10/2016 and scan c-band just fine, so I don'd know what is going on, just wondering if any of you noticed this change.
Regards.
Chewie
Thread: Enigma 2 and C-BAND Blind Scan.
Results 1 to 10 of 24
-
Enigma 2 and C-BAND Blind Scan. – 09-04-2016,10:50 AM
-
Post Thanks / Like - 1 Thanks, 0 Likes, 0 Kiss My Assel bandido thanked for this post
-
09-04-2016,11:10 AM
Tons of changes have been made to the blindscan plugin in the last few months. I will check it if you give me the exact build number or image identification number.
-
09-04-2016,01:37 PM
I haven't blind scanned in a while, so I thought I would try it with OpenATV which I originally installed in multiboot back on July 8th. All updates since then were done on line, up to Sept. 1st. As you can see, I am also getting the ku screen when scanning for 101 C band.
Will try later with Satdreamgr which is in flash to see if the results are the same.
As you can see, this does not occur with BlindscanNA.
[Only registered and activated users can see links. ][Only registered and activated users can see links. ]
-
Post Thanks / Like - 2 Thanks, 0 Likes, 0 Kiss My Assel bandido, ViP3R thanked for this post
-
09-04-2016,02:06 PM
Did anybody report this blindscan issue using the OpenATV forum?
-
09-04-2016,03:32 PM
Many different groups use OE Alliance, so that is why this error is in more than one group image.
c_band_loc_osc = None
c_band_loc_osc = 5150
OpenATV will probably fix the blindscan error posted above if someone will take the time to report it.
I also noticed the ATSC usb tuners from Hauppauge are recognized in the OpenATV image, but enigma does not know what to do with them so they are listed as nothing. Kernel and other needed Patches are available and OpenATV may very well add them if someone will only ask.
-
Post Thanks / Like - 1 Thanks, 0 Likes, 0 Kiss My Asseastof111 thanked for this post
-
09-04-2016,04:25 PM
Hello Guys
I haven't reported to any group of this problem, the images that have this issue are ATV 5.3, OPENSPA 6.0.004, OPENDROID 5.5.
Regards.
Chewie
-
Post Thanks / Like - 2 Thanks, 0 Likes, 0 Kiss My Assel bandido, eastof111 thanked for this post
-
09-04-2016,05:13 PM
I think all ot those images are based on OE Alliance. Tell OpenATV about it and they will fix it. I have pointed out what the exact problem is. Somebody made an error while updating the plugin. Either tell them about it or wait for it to be fixed.
-
Post Thanks / Like - 1 Thanks, 0 Likes, 0 Kiss My Asseastof111 thanked for this post
-
09-05-2016,09:26 PM
Posted on OpenATV site in english section.
-
Post Thanks / Like - 2 Thanks, 1 Likes, 0 Kiss My Assel bandido, ViP3R thanked for this postel bandido liked this post
-
09-10-2016,04:59 PM
Does this problem still exist?
-
09-10-2016,08:52 PM
Yes, it still has not been updated.
-
Post Thanks / Like - 1 Thanks, 0 Likes, 0 Kiss My Assel bandido thanked for this post