stuck on pal mode after installing aztrino1.5

[rosemont]

just can't seem to find option menu to load it via usb.....usually it's in settings on original azbox but for aztrino i don't see it...lol

[Guest]

Have you tried shutting the receiver off at the back and inserting usb, then switching it back on with the usb still in?

[Guest]

I'm doing my best to get an answer for you rosemont, I'll post as soon as I can- hold tight.

[rosemont]

yeah i did try the switch in the back whit usb inserted..........no go...just boots to aztrino.
thank you for your help it is very appriciated.

[Guest]

I have an azbox but I have never flashed my receiver with an aztrino file. I asked one of my azbox bud gurus and his reply was:

Use azup to put your box in rescue mode.

[Guest]

One of my other azbox guru buds recommends this:


use jazup, but before you start with jazup load firmware 5308 on a usb then rename it patch not patch.bin just patch, you will need
the ip for the azbox and it will need to be hardwire from the router to the azbox, jazup is a very simple program to use it has all
the files in it that you need so all you need is your usb with 5308 and jazup and the azbox ip.
if you need more help just ask.
as for how to use trino, i never got past the startup menu, and i worked with it for 3 days lol.

[rosemont]

thank you....i will give a try and report back on my results.

[rosemont]

any perticular version?
2.6 does not seem to work.
i'll try again later....learn as we go ...i guess...lol

[rosemont]

tried again...can't seem to get it ...weird..must be doing something wrong.

[iq180]

tried again...can't seem to get it ...weird..must be doing something wrong.

i see this is an old post, did you get it going or not, i mite be able to help you with it if you did not.