Incompatible STB firmware or broken 22Khz Controlled Switch?

[WilburSmith]

I acquired a 1 meter PrimeStar dish and decided to set it up on a dedicated mount so I could practice finding satellites. But then I discovered it was picking up transponders my 90cm dish was unable to get so I was impressed. If I find more of them I'll grab them.

[WilburSmith]

Here is the link to the advert:

[Only registered and activated users can see links. ]

It does say: "Also can be used to send Universal 9750/10600 LNBS to 10600 L.O. Freq only"

[Keith Brannen]

Here is the link to the advert:

[Only registered and activated users can see links. ]

It does say: "Also can be used to send Universal 9750/10600 LNBS to 10600 L.O. Freq only"

OK, so it does basically have the warning necessary, but maybe not as explicit as it might have been.

[Keith Brannen]

I acquired a 1 meter PrimeStar dish and decided to set it up on a dedicated mount so I could practice finding satellites. But then I discovered it was picking up transponders my 90cm dish was unable to get so I was impressed. If I find more of them I'll grab them.

If you do, with a 4x1 switch you can add two of them, and if you use Standard LNBs and two 22 KHZ switches, four! Or get an 8x1 switch! LOL!

[WilburSmith]

I received a switch today and wired it up. I changed the ports in the antenna settings and now everything is working smoothly. Thank you to everyone who helped me learn how this works.

ps where is the thread solved button?