My notes say the stock ASC1 will deliver about 1 amp of current at 32 volts dc. My notes also show 37 vdc measured at the ASC1 bridge rectifier without any load. So the voltage on a stock ASC1 drops by a very noticeable amount, even with a small current load.
I have tested this new power supply to 4.5 amps of current at 35.5 volts. That should be more than I will need, so now the task of installing it inside the ASC1 will start.
Results 1 to 10 of 62
Threaded View
-
06-07-2017,03:51 PM