Vu+Zero WiFi

[Costactc]

Those are not options for me. All I see is use interface and use dhcp.

[el bandido]

Either your device is not installed or the Zero does not support wireless, which I doubt. Connecting the device to a computer should show the make/model of the wireless device.
The make/model of your device should be determined, or go into the menu and load every possible wifi driver. Then reboot and see if your device is detected.

[Costactc]

Thanks for your patience EB, calling it a night. Any recommended wifi device that you know would work?

[el bandido]

I do not use usb wifi so I cannot suggest one. Most of my receivers that I normally use have that feature built in.

[Costactc]

Either your device is not installed or the Zero does not support wireless, which I doubt. Connecting the device to a computer should show the make/model of the wireless device.
The make/model of your device should be determined, or go into the menu and load every possible wifi driver. Then reboot and see if your device is detected.

It worked like a charm. I downloaded all of them and rebooted, now I have the same 2 choices as in your previous post EB. It works out to be an rt2800 and my zero is now connected with wifi.

[Pale-Rider]

we removed the wifi drivers from the base image a long time ago for all but the official Vu+ wifi dongle, this was to reduce the size of the image and the problems housing all those drivers was causing to the image.

Glad to see you got it sorted though CC.

[Costactc]

I jumped the gun in my previous post. I can't figure out how to enter my password for my network, I'll keep at it.

[el bandido]

Look in the adaptor settings.
[Solo gli utenti registrati e attivati possono vedere i link. ]

Found a X2 wifi device. Plugged it into the Windows computer, then went to device manager and located the wifi device. The properties sheet of the device told me it was Ralink 802.11n. Doing this made it lots easier to find the correct Zero driver to run it.

[Costactc]

I've gotten that far EB but what do you need to press to be able to enter your password? When you press OK it just saves without having entered the password.

[el bandido]

Use the number keys on the remote. They will give you numbers and letters as you press them. OR connect a wireless keyboard.