Optibox Anaconda Question Thread

[ViP3R]

Another editor will most probably be needed to add your sat list for E2.. the one in the Alien thread should work fine.

[el bandido]

The PolarEdit 10X86 channel Editor allows E2 files to be imported. I do not know how well it will work, but I see the option for it in this Channel Editor.

[rodder]

tried to update boot loader for E2 per instructions and i get a Er- 90

[el bandido]

What kind of USB stick are you using? Ho many MB can it hold?
Try a different usb stick, preferably Kingston.

[rodder]

Using a kingston 4 mb i thing i will hold of on this till we get more info i don"t want to brick my receiver

[el bandido]

Just tried again and hung up on the same tp. Finally cancelled the blind scan again after over 10 minutes on the same tp.

Try changing your lnb l.o. frequency by about 2MHz. Try 5148 or 5152 instead of 5150. See if this slight change in the l.o. frequency makes any difference.

[rodder]

TP Problem trying to scan 3920-V-30000 s/2 5/6 8psk on 105 got a 84% signal it will scan half way and lock up.

I tried this again 4 times no go the 5th time i noticed everytime i would go to that transponder the receiver would have the Fec set at 1/2 so i went ahead and scanned it and it worked all channels scrambled but 3.

[SatelliteGuy]

Can someone please tell me how I can sort the channels by satellite? Most receivers have a "sat" button that you simply push and select a satellite. Then you can change channels up and down only on that satellite.

I've also noticed that the sound level is low compared to other receivers using the HDMI output. I need to turn the volume up on the receiver and TV just to hear it correctly. Does anyone else have this problem with the Anaconda?

[el bandido]

The FAV button on the remote control will list the channels by satellite.

HDMI audio may be adjusted in the A/V Output Setting Menu. See if you can correct your audio problem in this menu. EB

[Guest]

By pressing the yellow button on the remote, you can increase audio by 30%.