TNAP-5.1 Image Discussion

[el bandido]

All online updates installed ok.

The online updates may be causing it. Let me tear the feeds down and rebuild them.

[lme]

One personal issue: trying to remove softcams-ncam, I get this message suggesting how to do it witch I do not understand, due to my missing e2 knowledge.

[Solo gli utenti registrati e attivati possono vedere i link. ]

[Megatron817]

What happens when you flash the image without restoring anything?

The Positioner setup may be the problem as it is logging signal in db. This is the only thing that has changed in Positioner setup.

I think the sluggish behavior is the satfinder system plugin that gets updated when doing an online software update. The 2024-04-26 image for the Mio4k+ is fine until a software update is done. I reverted the satfinder system plugin from before the software update and all is good again here.

[lme]

I think the sluggish behavior is the satfinder system plugin that gets updated when doing an online software update. The 2024-04-26 image for the Mio4k+ is fine until a software update is done. I reverted the satfinder system plugin from before the software update and all is good again here.

Can you post it ?
thx.

[Megatron817]

extract first then replace it at usr/lib/enigma2/python/plugins/SystemPlugins and reboot.

[lme]

extract first then replace it at usr/lib/enigma2/python/plugins/SystemPlugins and reboot.

Thank you.
I guess the place for the files is: usr/lib/enigma2/python/plugins/SystemPlugins/SATFINDER.
It is working better, but is missing "service list" in signal finder menu. So I replaced your plugin.pyc with the one from my tnap5 backup.

[lme]

An issue with the "backup suite": tryied to make backups with 2 diff USB brands, of 2 diff images, and both failed.
[Solo gli utenti registrati e attivati possono vedere i link. ]

[Solo gli utenti registrati e attivati possono vedere i link. ]

[Solo gli utenti registrati e attivati possono vedere i link. ]

[Solo gli utenti registrati e attivati possono vedere i link. ]

[eastof111]

Backupsuite is letting you know that it's missing the zip file in the usr_bin directory.

[lme]

I understood that, so where is zip file ?
So, I took the chance and loaded the missing zip file from the tnap5 backup.
Now backupsuite is working.

[eastof111]

Don't have the same receiver as you, but I am guessing this file should work. If not, someone with the same receiver as you will have to upload.

Can't upload files right now, the BBS is still in repair mode....