I will upload the image I am using to blindscan once I figure out what is needed. A work-around solved the DVB-S2X crash, but that means you need to start a telnet session to watch for DVB-S2X transponders in a blindscan. I set DVB-S2X to log on the receiver as DVB-S. There are not many DVB-S2X transponders, but I would like to know when one is found.
Thread: VU+ Zero 4K Receiver.
Results 61 to 70 of 251
-
03-21-2018,10:23 AM
-
Post Thanks / Like - 1 Thanks, 0 Likes, 0 Kiss My Assmountaineer thanked for this post
-
03-21-2018,11:48 AM
Thanks EB
I will scan these sats when I get off from work, hopefully they still there, which image are you using?
-
Post Thanks / Like - 1 Thanks, 0 Likes, 0 Kiss My Assmountaineer thanked for this post
-
03-21-2018,12:02 PM
SatDreamGr Experimental.
Install image and online update OR Telnet opkg update && opkg upgrade.
Stock Blindscan plugin is in downloadable plugins under system plugins.
-
Post Thanks / Like - 1 Thanks, 0 Likes, 0 Kiss My Assmountaineer thanked for this post
-
-
Post Thanks / Like - 4 Thanks, 0 Likes, 0 Kiss My Ass
-
03-22-2018,12:29 PM
Sounds like a nice box guy's! New section created for the VU+ Zero 4K and thread moved here.
click click b00m
-
Post Thanks / Like - 2 Thanks, 1 Likes, 0 Kiss My Assel bandido, mountaineer thanked for this postel bandido liked this post
-
-
Post Thanks / Like - 1 Thanks, 0 Likes, 0 Kiss My Assmountaineer thanked for this post
-
03-24-2018,06:02 PM
Thanks EB it works good.
Regards.
Chewie.
-
Post Thanks / Like - 2 Thanks, 0 Likes, 0 Kiss My Assel bandido, mountaineer thanked for this post
-
-
Post Thanks / Like - 1 Thanks, 0 Likes, 0 Kiss My Assmountaineer thanked for this post
-
03-24-2018,11:14 PM
Here is the DVB-S2X FEC list:
+ "FEC_13_45" : parm.FEC_13_45, "FEC_9_20" : parm.FEC_9_20, "FEC_11_20" : parm.FEC_11_20, "FEC_23_36" : parm.FEC_23_36, "FEC_25_36" : parm.FEC_25_36,
+ "FEC_13_18" : parm.FEC_13_18, "FEC_26_45" : parm.FEC_26_45, "FEC_28_45" : parm.FEC_28_45, "FEC_7_9" : parm.FEC_7_9, "FEC_77_90" : parm.FEC_77_90,
+ "FEC_32_45" : parm.FEC_32_45, "FEC_11_15" : parm.FEC_11_15, "FEC_1_2_L" : parm.FEC_1_2_L, "FEC_8_15_L" : parm.FEC_8_15_L, "FEC_3_5_L" : parm.FEC_3_5_L,
+ "FEC_2_3_L" : parm.FEC_2_3_L, "FEC_5_9_L" : parm.FEC_5_9_L, "FEC_26_45_L" : parm.FEC_26_45_L}
[Only registered and activated users can see links. ]
-
Post Thanks / Like - 1 Thanks, 0 Likes, 0 Kiss My Assmountaineer thanked for this post
-
03-25-2018,11:39 AM
The Zero 4K seems to support 4 usb tuners and one internal tuner for a total of 5 tuners. I have no problem using the internal tuner plus 2 usb tuners for a total of 3 tuners. But the box crashes when usb tuner 3 is added. Seems tuner slot 3 is being skipped.
Debug shows tuners numbered 0,1,2 which is correct for 3 tuners.
Debug shows 0,1,2,4 when the third usb tuner is added. This is not correct, so enigma2 crashes or stops at this error.
-
Post Thanks / Like - 1 Thanks, 0 Likes, 0 Kiss My AssViP3R thanked for this post