Enigma 2 and diseqc 2.0 switches.

[mountaineer]

Have a diseqc 2.0 multiswitch/diseqc switch combo. 17 inputs and 8 outputs . Control by each receiver by diseqc 1.0 commands and 22 on/off.
So 1-4 ports are diseqc committed switch 1 and either 22 on or off to use all 4 ports.....5-8 use diseqc commited command 2 etc.

My problem is that I have 4 E2 receivers that have trouble with the switch..it is in the 22 on and off ONLY. So some of the inputs arent usable by the E2 receivers. The other 4 receivers that are openbox s10, azbox bravissimo, TBS computer card, and genpix computer card do not have any issues with the switch.

So the issue is in the E2. In this case all ports on #1 (1-4 inputs)work for all receivers. But # 2 (5-8 inputs) the H 22 on does not work...the E2 receivers sees it as always off and therefore sees H 22 off port only. On #3 (9 - 12 inputs) V off is always 22 on and cant see the port...and H 22 on is always seen as off and the port cant be used . On #4 (13-16 inputs) the 22 are always seen as on therefore both 22 off ports are useless to E2.


[Only registered and activated users can see links. ]


There is nothing wrong with the switch...works perfectly with all other receivers.

Here is the kicker::::
i have a prof 7500 that is a 2nd tuner for AZME... It has the same issues when trying to tune in E2......HOWEVER if I take it and plug it into a computer and use smartdvb...it operates the switch perfectly..SO it is in E2. Can anyone see or help me with this?

Thanks!!!!!!!!!

[el bandido]

What E2 receivers and images have you tried?

[mountaineer]

Azme 3.92 Kernel.....openspa image

2 Edison OS minis openpli latest kernel

Zgemma H5AC have to check when get home. I think Openpli

[mountaineer]

i think I will try the optibox anaconda E2 when I get home and see if it is in the SH4 images as well.

[mountaineer]

Also these E2 boxes had no issues controlling stand alone 1.1 and 1.0 diseqc switches or in combination with zinwell multiswitches.
I think it is in the 2.0 bidirectional communication.

[el bandido]

Please Do this:
On one OS Mini,
Configure ALL your switch settings like they are supposed to be, OR what you think they are supposed to be. Reboot the receiver, then post your settings file in "etc/enigma2". Make sure you have not logged in to Facebook or anywhere else like that which requires a password. Some passwords are stored in the settings file. You may view the settings file if you wish using notepad or notepad++

[mountaineer]

Will do that this evening when I get home. Thanks!!!!

[el bandido]

Probably need to provide the make/model of switch too. That information may help.

[mountaineer]

[Only registered and activated users can see links. ]


Digital Satellite EMP-Centauri multiswitch 17/8 P 170 CP 8

[mountaineer]

settings file: thanks!!!