Results 1 to 8 of 8
  1. Collapse Details
    s10 box and dish size?
    #1
    Date d'Adhésion
    May 2013
    Poteaux
    4
    Poster des remerciements / J'aime
    Contribuer If you enjoy reading the
    content here, click the below
    image to support our site.
    Click Here To Contribute To Our Site
    hello, we are newbies and have a s10 set up to a 21" dish. Will this work or did we just waste our money? thanks any input would lower the stress level!
    Reply With Quote
     

  2. Collapse Details
    #2
    Date d'Adhésion
    May 2011
    Poteaux
    5,807
    Poster des remerciements / J'aime
    21" is way to small for todays signals. What satellite are you aimimg?? Are you using Free to Air?? Give us some more details to help you out
    X2 Premium III HD, Openbox X5/ S10, Gsky V3/V6, iSmart m100
    Reply With Quote
     

  3. Collapse Details
    #3
    Date d'Adhésion
    Dec 2010
    Location
    Calgary, AB
    Poteaux
    13,958
    Poster des remerciements / J'aime
    Your S10 is fine, but you will need a bigger dish than 21' that's about the size of the plate I use for my burgers and fries....kidding..
    For true FTA KU-Band you want at least a 33" dish minimum...bigger is better. and a motor will do wonders for you.

    click click b00m
    Reply With Quote
     

  4. Collapse Details
    #4
    Date d'Adhésion
    May 2013
    Poteaux
    4
    Poster des remerciements / J'aime
    We are pointed at 119 & 110? we are looking for FTA our neighbour brought his Fusion over to find a signal and found it but when I hooked my s10 back up I got nothing? It is a bell dish that was here when we moved in. We can not install a large dish because we rent and live in a townhouse.
    Reply With Quote
     

  5. Collapse Details
    #5
    Date d'Adhésion
    Jan 2011
    Location
    Eastern Ontario
    Poteaux
    6,521
    Poster des remerciements / J'aime
    There is nothing in the clear on 110 or 119. Both of those sats are encrypted and would require a subscription to DISH network and that is not available legally to Canadians. Sorry. Is there no way you could swap out the 21" for a 33"?
    Optibox Anaconda, X2, OpenBox-S9, CS8000 and 2 X CW700S, 7 1/2' Perfect Ten scanning 55W to 139W C Band and a 39" Q-Sat scanning 30W to 125W Ku Band
    Reply With Quote
     

  6. Collapse Details
    #6
    Date d'Adhésion
    May 2013
    Poteaux
    4
    Poster des remerciements / J'aime
    Thanks so much for your help. Is there anything I can pick up with the dish I have now and what would be the settings? Thinking I might have to chuck the s10 and buy something that will work?
    Reply With Quote
     

  7. Collapse Details
    #7
    Date d'Adhésion
    Dec 2012
    Poteaux
    9,278
    Poster des remerciements / J'aime
    The s10 isn't the issue as it will work well for true fta but rather dish size. There must be a way to install a larger dish where your dish is now.
    Reply With Quote
     

  8. Collapse Details
    #8
    Date d'Adhésion
    Feb 2011
    Location
    New England
    Poteaux
    3,551
    Poster des remerciements / J'aime
    I would keep the mount that the dish is using and put up at least a 33" or so dish in its spot. You may be able to put the larger dish on the same pole as the one you have. At that point you could point it at whatever dish you can find. 91W is a good one for feeds among others. There are several outfits that sell dishes relatively inexpensive online shipped to your door.
    Portable Comtech 13', Winegard 10', SAMI 7.5', 3 39" Ku dishes one motorized. Scanning 30w-131w
    Reply With Quote
     

Autorisations de Publication

  • Vous peut pas publier de nouveaux sujets
  • Vous peut pas poster des réponses
  • Vous peut pas poster des pièces jointes
  • Vous peut pas modifiez vos messages
  •