What enigma2 image did you load and where did you get it from?
Boot to Spark,FTP into the box using Filezilla or similar, and find the net_server.xml file.
Thread: Amiko Alien Boot Loader
Results 11 to 20 of 44
-
11-30-2017,04:32 PM
-
11-30-2017,04:37 PM
Not sure on the E2 file. I had 2 that has been on my computer for awhile and I honestly don't remember which one is loaded and where I got it. If you have a better file let me know and I'll load it ASAP. I haven't been able to get any response from the box with Filezilla using 192.168.40.19 Am I using the correct IP ? I can load files via TFTP and the Cisco program with that IP
-
11-30-2017,05:18 PM
Try these three. One of them should work.
192.168.0.69 - 192.168.3.119 - 192.168.3.1
Starting kernel console=ttyAS1,115200 rw ramdisk_size=6144 root=/dev/ram0 init=/
linuxrc ip=192.168.0.69:192.168.3.119:192.168.3.1:255.255. 0.0:Spark:eth0ff stm
maceth=msglvl:0,phyaddr:2,watchdog:5000 bigphysarea=7000 nwhwconf=device:eth0,hw
addr:30:00:0A:00:11:6B Manufacture=Spark-Project STB_ID=0C:00:0A:00:00:11:6B - 0
x0153d000 - 2896628 ...
-
-
11-30-2017,06:18 PM
Downloading now. ( back at shop) I will run this in just a moment and see what happens
-
11-30-2017,06:37 PM
20171130 loading
-
11-30-2017,06:49 PM
No joy with FTP and so far the same with E2 Now showing 00:00 and counting up
-
11-30-2017,07:03 PM
You will need to connect the box to a router or similar device and get the Alien2 ip for ftp from the router. That is the only other way I know if the listed ip address will not connect.
-
11-30-2017,07:03 PM
OK I'll give that a shot..thanks
-
11-30-2017,07:11 PM
My router here in the shop doesn't show the A2 connecting but both LED's are lighted on the LAN module. I dunno looks like I am going to be in the market fr a new receiver