Thought I'd create a thread that is solely dedicated to the menus and capabilities of the Technomate 5302 receiver which is my favourite box at the moment. I will go through all aspects of the menus with pictures.
Results 1 to 10 of 12
-
Technomate 5302 Menus and Capabilities – 02-19-2014,03:41 PM
-
Blind Search – 02-19-2014,03:48 PM
My Tecnomate 5302 is being used on ku band with usals to control motor functions. I decided to choose Galaxy 3 at 95w to show the blind search menus. The things I really like about this menu is the ability to change your tp range from anything in the 10700-12750 range and I really like the step scan from 1-32 MHz to increase its scan speed or to lower it when scanning a scpc satellite like the Satmex sats. You'll also notice in the third picture that a tp is highlighted to indicate that it's new and once the scan is over you see the results on your screen, including the scan time.
[Only registered and activated users can see links. ][Only registered and activated users can see links. ][Only registered and activated users can see links. ][Only registered and activated users can see links. ][Only registered and activated users can see links. ]
-
02-19-2014,04:03 PM
The options you mentioned are great and I also like that it allows for a polarity scan and I especially like that it gives the s/s2, 8psk, and fec info. From a scanning options standpoint it looks to have it all. How does the tuner sensitivity compare to the other receivers in your arsenal?
6ft Solid w/NS741 C/KU LNBF Openbox s9, 1M Channel Master w/Avenger 321 Openbox x3
-
Satellite Menu – 02-19-2014,04:08 PM
Several pictures of the satellite menu:
Main Menu
Satellite Setup(sat must be saved in order to be setup)
Motorized Setup
Auto Navigation
Blind Search
Advanced Search
[Only registered and activated users can see links. ][Only registered and activated users can see links. ][Only registered and activated users can see links. ][Only registered and activated users can see links. ][Only registered and activated users can see links. ][Only registered and activated users can see links. ]
-
Channel Info – 02-19-2014,04:18 PM
-
-
02-19-2014,10:00 PM
Will it do 1mhz transponder spacing? The triplex will do it and store the channels. A good place to check is the 1035 sr transponders on 95w cband. I picked up a few different channels with 1mhz spacing.
Portable Comtech 13', Winegard 10', SAMI 7.5', 3 39" Ku dishes one motorized. Scanning 30w-131w
-
-
-
02-21-2014,02:05 PM
I'd like to thank East for pointing me in the right direction for fw updates. I flashed the latest file from Nov 7/13. By pressing the exit button, as you are watching tv, a signal meter is displayed and a satellite finder section in the install menu:
[Only registered and activated users can see links. ][Only registered and activated users can see links. ][Only registered and activated users can see links. ]