Hi group I hope that i am posting this in the correct place.
i have a viewsat 9000 hd . i have installed a 8psk moudle in this unit.
can some one point me in the right direction as far as recieving s2 8psk tps like the ones on 87 w.
seems like that this reciever dose not do s2 8psk??
thank you in advance
bogiewrench
Thread: viewsat 9000hd
Results 1 to 10 of 10
-
viewsat 9000hd – 11-08-2011,02:03 PM
-
Guest Guest11-08-2011,02:17 PM
What size dish are you using? The s2/8psk tp on Ses2 at 87w are on c band, you'll need a dish, preferably mesh, of at least 7.5'.
-
11-09-2011,10:46 AM
Hi Viper
i have 8 ft mesh and have no problem with other recivers ie azbox,sathawk 800 etc.
but i can not get a lock on with my vs9000hd unit at all.while the rest of recievers are at 92 or so in quality.
could you please tell me witch firmware i should use with the vs9000 hd.
I also have problem with the blindscan on this unit and it seems to be most on cband.
thank you in advance
bogiewrench
-
11-09-2011,06:14 PM
I had my 9000 hooked up a few months ago, but just on my 39" motorized dish.. and used USALS.. So I can't really advice on the C-Band side. The scan times are not the best on this box to say the least.. The file I loaded is in the files section here. [Only registered and activated users can see links. ]
Give it a shot and see how that goes.
click click b00m
-
11-09-2011,06:30 PM
Thank you viper i will try the firmware and post the results.
bogiewrench
-
11-16-2011,02:43 PM
Hi viper
i was wondering if the link to v1.33 view sat firmware working for you?
i have been trying to download it and have no luck with it.
thank you in advance
bogiewrench
-
-
-
-
11-21-2011,05:42 PM
My thanks to all
cheers
bogiewrench