I finally decided, this morning, to see if I could get my 39" Ku band dish back into operation. After about 15 to 20 minutes I had a solid lock on 97 W. I wasn't concerned with what I found as I had set the receiver to 97 and so the motor moved the dish. The dish had blown off position in a very strong wind. Once I had a lock, I blind scanned 83 through 116.8 with my old CW700S just the make sure I was still on the arc. I then swapped out the 700 for my Openbox S9 so that I could pull in DVB-S2 and HD channels. Well, I found and scanned 97 but the S9 has not been able to find any other sat. The 700 found 11735 on 83 with 55% Q and the S9 could not even muster up a hiccup. Anyone think of why the S9 is having such a hard time with signals
Thread: S9 not locking sats
Results 1 to 6 of 6
Threaded View
-
S9 not locking sats – 01-05-2013,08:16 PMOptibox Anaconda, X2, OpenBox-S9, CS8000 and 2 X CW700S, 7 1/2' Perfect Ten scanning 55W to 139W C Band and a 39" Q-Sat scanning 30W to 125W Ku Band