Page 1 of 2 12 LastLast
Results 1 to 10 of 17
  1. Collapse Details
    X2 Premium III March 2015 Firmware-Discussion
    #1
    Beitrittsdatum
    May 2011
    Beiträge
    5,807
    Post Danke / Gefällt mir
    Beitragen Wenn Ihnen das Lesen Spaß macht
    inhalt hier, klicken sie auf das unten stehende
    bild zur Unterstützung unserer Website.
    Click Here To Contribute To Our Site
    X2 Premium III March 2015 Firmware-Discussion

    Discuss anything for this release here
    X2 Premium III HD, Openbox X5/ S10, Gsky V3/V6, iSmart m100
    Reply With Quote
     

  2. Collapse Details
    new file for x2 3
    #2
    Beitrittsdatum
    Jun 2013
    Beiträge
    53
    Post Danke / Gefällt mir
    I hope did fix the blind scan because the signal and scan on the 55 and 58 west compare to x2 premium II are no good
    Last edited by cpr43; 03-05-2015 at 06:30 AM.
    Reply With Quote
     

  3. Collapse Details
    #3
    Beitrittsdatum
    Jun 2013
    Beiträge
    53
    Post Danke / Gefällt mir
    I don't scan 55 and 58 because my Dish have snow . Tomorrow I do one scan and I give the reports
    Reply With Quote
     

  4. Collapse Details
    #4
    Beitrittsdatum
    Dec 2012
    Beiträge
    9,278
    Post Danke / Gefällt mir
    I flashed the new fw but I have yet to see any difference. Starting my scans all over as the info I saved will not flash back...no biggee.
    Reply With Quote
     

  5. Collapse Details
    #5
    Beitrittsdatum
    Dec 2012
    Beiträge
    9,278
    Post Danke / Gefällt mir
    A huge amount of iptv channels have been added, mainly foreign. I also noticed more movies were added.
    Reply With Quote
     

  6. Collapse Details
    #6
    Beitrittsdatum
    May 2011
    Beiträge
    5,807
    Post Danke / Gefällt mir
    They fixed the internet connection was dropping or not reconnecting after on/ off the box. They also added 3D movies. Looks like it was requested in the other side of the word.
    Last edited by cpr43; 03-06-2015 at 09:17 AM.
    X2 Premium III HD, Openbox X5/ S10, Gsky V3/V6, iSmart m100
    Reply With Quote
     

  7. Collapse Details
    #7
    Beitrittsdatum
    Jun 2013
    Beiträge
    66
    Post Danke / Gefällt mir
    I Loaded the March firmware last night . I didn't notice anything different. My internet is to slow for streaming so didn't check anything there. Was hoping the menu transparency control would be fixed along with a way to rename channels without all the guess work but didn't happen. The Premium lll tuner is also weaker than the Premium ll. I compared scans on a dual lnb same dish.
    Reply With Quote
     

  8. Collapse Details
    #8
    Beitrittsdatum
    Jun 2013
    Beiträge
    53
    Post Danke / Gefällt mir
    Same no difference .I scan 55.5 and 58 west and no improvement .The tuner on the premium 3 are weaker compare to the premium 2.I don't no if I have one good car I keep the car for longtime .So if the tuner of premium 2 are so good supposed keep the tuner on the premium3.The premium 2 on the 55.5 west scan 23 channels compare to premium3 16 to 17 on the 58 the two do almost the same job .Butt the 3880h 27690 fc 7/8 at 58 west strong signal on the [Only registered and activated users can see links. ]. Don't scan the freq the vantages 1100 the vantage vt1 the azbox premium plus and the premium 2 and 3 I don't no the signal on the receivers most of times are no good on all the receivers before very good on the 58 west I have that problem the rest good
    Reply With Quote
     

  9. Collapse Details
    #9
    Beitrittsdatum
    Dec 2012
    Beiträge
    9,278
    Post Danke / Gefällt mir
    Quote Originally Posted by tanka2 View Post
    Same no difference .I scan 55.5 and 58 west and no improvement .The tuner on the premium 3 are weaker compare to the premium 2.I don't no if I have one good car I keep the car for longtime .So if the tuner of premium 2 are so good supposed keep the tuner on the premium3.The premium 2 on the 55.5 west scan 23 channels compare to premium3 16 to 17 on the 58 the two do almost the same job .Butt the 3880h 27690 fc 7/8 at 58 west strong signal on the [Only registered and activated users can see links. ]. Don't scan the freq the vantages 1100 the vantage vt1 the azbox premium plus and the premium 2 and 3 I don't no the signal on the receivers most of times are no good on all the receivers before very good on the 58 west I have that problem the rest good
    I have had no issues scanning 55.5 and 58w. I also found that the premium III scanned in an extremely tough tp on 55.5w that most other receivers I have tested don't:

    4098 H 2272
    Reply With Quote
     

  10. Collapse Details
    #10
    Beitrittsdatum
    Jun 2013
    Beiträge
    53
    Post Danke / Gefällt mir
    Did you have the 10 ft dish? I have the 8 Ft dish and on the 8 ft the premium 2 did scan seven more channels then the 3 on the 55.5 west .After the 55.5 west to the 137 west premium 2 and 3 the same.But the premium 3 compare to the vantages and azbox are better scan.Premium two on the 8 ft the best blind scan don't missing channels premium 3 missing few but then on the manual scan did bring the channels
    Reply With Quote
     

Page 1 of 2 12 LastLast

Veröffentlichungsberechtigungen

  • Sie darf nicht neue Themen posten
  • Sie darf nicht antworten posten
  • Sie darf nicht anhänge posten
  • Sie darf nicht bearbeiten Sie Ihre Beiträge
  •