I'll let you figure out why but here's the news. The Start Dish Motor feature is now working completely on the latest image (0505) including displaying the correct dB level in the Blind Scan window. Not related to solving this, I reconfigured my whole system to put the motor on Tuner B and a fixed dish on Tuner A. This is probably temporary since Tuner A is superior and I'll likely change the motor back to Tuner A later. Perhaps because of this, or because I flashed an older image (0412) that allowed the feature to work, I now have it working even on the latest image.
I'm getting to like this feature. Now...if we could have some way to select a list of satellites in advance to blind scan then we could walk away and come back later to all the blind scan results.
Thread: TNAP-5.1 Image Discussion
Results 121 to 130 of 171
-
05-07-2024,06:13 PMEdision OS Mio+ 4K UHD w/TNAP 5.1, GT Media V7S5X sharing 4-foot motorized Fortec offset (150W-82W), Invacom QPH-031 Ku linear/circular LNBF, Titanium C1PLL LNBF. 41-inch Star Choice w/circular LNB: 77W. Shaw 60e elliptical 103W/99W.
-
Post Thanks / Like - 1 Thanks, 0 Likes, 0 Kiss My Assel bandido thanked for this post
-
05-07-2024,07:28 PM
TNAP and most other images are designed for Motorized Satellite Systems that are not broken or need of repair.
Fix your dish system and you will not have these problems!
Now I gotta ask:
Why are you even bothering to post in this thread? You have berated about the TNAP image not living up to your personal expectations and have berated other images because the channel guide does not equal what a pay satellite receiver has. So why post in this thread? You don't use the TNAP image, you don't like the TNAP image ...etc. Are you bored or just Trolling?
-
-
Post Thanks / Like - 2 Thanks, 0 Likes, 0 Kiss My Asslme, Megatron817 thanked for this post
-
05-07-2024,08:57 PM
Last edited by cyberham; 05-07-2024 at 09:15 PM.
Edision OS Mio+ 4K UHD w/TNAP 5.1, GT Media V7S5X sharing 4-foot motorized Fortec offset (150W-82W), Invacom QPH-031 Ku linear/circular LNBF, Titanium C1PLL LNBF. 41-inch Star Choice w/circular LNB: 77W. Shaw 60e elliptical 103W/99W.
-
-
Post Thanks / Like - 1 Thanks, 1 Likes, 0 Kiss My Ass
-
05-08-2024,08:02 AMEdision OS Mio+ 4K UHD w/TNAP 5.1, GT Media V7S5X sharing 4-foot motorized Fortec offset (150W-82W), Invacom QPH-031 Ku linear/circular LNBF, Titanium C1PLL LNBF. 41-inch Star Choice w/circular LNB: 77W. Shaw 60e elliptical 103W/99W.
-
05-08-2024,08:11 AM
There is One issue left.
Octagon SF8008 has only one signal to deal with. Edision has three. Signal levels for Edision are different in T2MI and Non-T2MI drivers. What about Tuner 2 in the Edision MIO+? What does it show?
With the last Blindscan update installed, Can you set up tuner 2 as a motorized dish for about 3 satellites and tell me what the signal shows as compared to what it should be when the dish motor starts. If we can get the signal values for tuner 2 we can calibrate it.
Thanks.
-
Post Thanks / Like - 1 Thanks, 0 Likes, 0 Kiss My Assstephan94 thanked for this post
-
05-08-2024,09:00 AM
With Tuner B configured with the motor, the Start Dish Motor function moves the dish correctly but there are no readings.
129W: Blind Scan screen shows 0 dB. Should be 12.0 dB.
123W: Blind Scan screen shows 0 dB. Should be 12.0 dB.
117W: Blind Scan screen shows 0 dB. Should be 10.4 dB.Edision OS Mio+ 4K UHD w/TNAP 5.1, GT Media V7S5X sharing 4-foot motorized Fortec offset (150W-82W), Invacom QPH-031 Ku linear/circular LNBF, Titanium C1PLL LNBF. 41-inch Star Choice w/circular LNB: 77W. Shaw 60e elliptical 103W/99W.
-
Post Thanks / Like - 1 Thanks, 0 Likes, 0 Kiss My Assel bandido thanked for this post
-
05-08-2024,09:49 AM
Now we meed the values being outputted. and do the following:
Go to signal finder and tune the first transponder 117w. Note the signal value.
Telnet to the receiver
cd /usr/lib/enigma2/python
enter this command to see what the blindscan plugin thinks the transponder signal values are.
python Dvbcsvb.py
Copy what the above command outputs. and then also copy what the value for the transponder is in signal finder.
If we have what the blindscan thinks the signal is compared to what the signal really is, then we can make a somewhat usable value to be outputted in blindscan plugin.
You may repeat this for the other 2 satellites.
-
05-08-2024,10:28 AMEdision OS Mio+ 4K UHD w/TNAP 5.1, GT Media V7S5X sharing 4-foot motorized Fortec offset (150W-82W), Invacom QPH-031 Ku linear/circular LNBF, Titanium C1PLL LNBF. 41-inch Star Choice w/circular LNB: 77W. Shaw 60e elliptical 103W/99W.
-
Post Thanks / Like - 1 Thanks, 1 Likes, 0 Kiss My Assel bandido thanked for this postel bandido liked this post