thats a sweet deal, if only i had the room, living downtown sucks for that as there is no room for nothing and i face a public parking, and the city is looking everytime they go by...
Thread: Channel Master 1.2m
Results 11 to 20 of 39
-
03-25-2015,01:22 PM
Last edited by sadass; 03-25-2015 at 01:25 PM. Reason: being a bad reader
Amiko mini HD se
Openbox S9
Fortec Star 39' motorized dish
OTA for local
-
03-25-2015,01:31 PM
Too bad and the guy is in Cornwall about every 2 weeks so no shipping charge.
-
-
03-25-2015,02:07 PM
Costa, how heavy is that dish for ground shipping?
-
03-25-2015,02:17 PM
It's not mentioned in the manual East but I would have to say about 40-45lbs with all the accessories.
-
03-25-2015,02:46 PM
Just did a rate request from UPS for 50# from Cornwall to AZ. and it comes out to $179 ground shipping. Too bad it's so expensive for shipping or I would bite.
-
-
04-13-2015,03:41 PM
I just received my new heavy duty H to H CX-500 for the Channel Master dish. I picked this up on a UK site and figured I saved hundreds instead of going the route of an actuator and a polar mount. I will have pictures later on. This is where I found it:
HTML Code:[url]http://www.ebay.co.uk/itm/NEW-Heavy-duty-H-TO-H-36-VOLT-MOTOR-for-Pole-mounted-or-channelmaster-dish/221719663472?_trksid=p2047675.c100011.m1850&_trkparms=aid%3D222007%26algo%3DSIC.MBE%26ao%3D1%26asc%3D20140107083358%26meid%3D6ac889e28c234a88815829f2f1fb32f2%26pid%3D100011%26rk%3D1%26rkt%3D1%26sd%3D221537300905[/url]
-
04-13-2015,03:47 PM
Looks like it's built like a tank!
-
04-13-2015,03:58 PM
It is East, this is old school. They don't build them like that anymore. I will slap a stand alone positioner to move the dish. I'm just not sure where to install this dish to avoid my wife divorcing me- an inground pole or on the roof???/