Vlákno: PSI X-2

Results 1 to 7 of 7
  1. Collapse Details
    PSI X-2
    #1
    Datum Připojení
    Dec 2012
    Příspěvek
    9,278
    Příspěvek Díky / Líbí Se Mi
    Přispět Pokud vás baví číst
    obsah zde, klikněte na níže
    obrázek na podporu našich stránek.
    Click Here To Contribute To Our Site
    I can't seem to locate an esx 242 lnbf so I decided to try this one instead. The price is definitely right but will take some time to arrive from Thailand:




    PSI C BAND SATELLITE DISH LNB LNBF DUAL OUTPUT PSI X-2 / SCALAR RING AND NUT SET
    HDTV Approved
    Model : LNB PSI X-2

    Quantity : 1


    SPECIFICATION
    - Input Frequency Range : 3.4 ~ 4.2 GHz
    - Output Frequency Range : 950 ~ 1750 MHz
    - L.O. Frequency : 5150 MHz



    This LNB for use with 2 satellite receivers.
    These 2 receivers can see the channel change both VER and HOR.
    Good for adding a point to watch the second.

    New model
    Extended signal to two-fold noise reduction.

    -HDTV Approved
    -Easy installation, easy to read focus and polarity markings
    -Come complete with the Scalar Ring in box


    spec-lnb-x2



    [Only registered and activated users can see links. ]



    [Only registered and activated users can see links. ]
    Reply With Quote
     

  2. Collapse Details
    #2
    Datum Připojení
    Feb 2011
    Umístění
    New England
    Příspěvek
    3,551
    Příspěvek Díky / Líbí Se Mi
    Did you ever receive this one Costa? I have a dual output WSI on my 7.5 that has worked very well for years.
    Last edited by rrob311; 02-16-2017 at 11:56 AM.
    Portable Comtech 13', Winegard 10', SAMI 7.5', 3 39" Ku dishes one motorized. Scanning 30w-131w
    Reply With Quote
     

  3. Collapse Details
    #3
    Datum Připojení
    Dec 2012
    Příspěvek
    9,278
    Příspěvek Díky / Líbí Se Mi
    PSI X-2 has been the lnbf on my 10' bud for 2 years now. I have tested it against others and it won hands down, the titanium was the worst of the lot.
    Reply With Quote
     

  4. Thanks rrob311 poděkoval za tento příspěvek
  5. Collapse Details
    #4
    Datum Připojení
    May 2011
    Příspěvek
    5,807
    Příspěvek Díky / Líbí Se Mi
    Sorry to hang in thread, but does this one scans in circular and linear without the need of inserting the dielectric plate? Is there anyone like that in the market?? Thks
    X2 Premium III HD, Openbox X5/ S10, Gsky V3/V6, iSmart m100
    Reply With Quote
     

  6. Collapse Details
    #5
    Datum Připojení
    Dec 2012
    Příspěvek
    9,278
    Příspěvek Díky / Líbí Se Mi
    No Carlos, just linear on this one but if a dilectric plate is inserted it will do circular as well. The only way I know of doing both is with a coroter but they are a bit pricey and have been a bit glitchy for me on both occasions when I tried them out. The Psi x-2 didn't come equipped with the plate and there are no markings on the interior for a plate.
    Reply With Quote
     

  7. Thanks cpr43 poděkoval za tento příspěvek
  8. Collapse Details
    #6
    Datum Připojení
    Feb 2011
    Umístění
    New England
    Příspěvek
    3,551
    Příspěvek Díky / Líbí Se Mi
    Costa did you ever have any switching concerns with this? It seems since I installed mine my diseqc switch will not switch to that port unless I toggle everything. It's either the lnb or my coax. I narrowed it down to that as I have switched receivers and switches. Unfortunately the problem is still there.
    Portable Comtech 13', Winegard 10', SAMI 7.5', 3 39" Ku dishes one motorized. Scanning 30w-131w
    Reply With Quote
     

  9. Collapse Details
    #7
    Datum Připojení
    Dec 2012
    Příspěvek
    9,278
    Příspěvek Díky / Líbí Se Mi
    I never use switches Rob and the Psi lnbf was removed from my bud last year. I am using the gsky lnbf on both my big dishes.
    Reply With Quote
     

  10. Thanks el bandido poděkoval za tento příspěvek

Oprávnění K Vysílání

  • Vy nemusí zveřejňovat nová vlákna
  • Vy nemusí odpovědi na příspěvky
  • Vy nemusí odeslat přílohy
  • Vy nemusí rezervovat
  •