Here is the firmware I used to recover my crashed X5
Directions:
Load .bin file onto a formatted usb stick into a folder named recovery
plug usb stick into receiver with power off. When turning on the power switch hold down the OK button on the front panel
you will then see a load message on the front of the box and it should automatically load the firmware where you will see the progress on the TV screen.
You can discuss this Thread >>HERE<<.
Thread: openbox x5 recovery
Results 1 to 1 of 1
-
openbox x5 recovery – 07-30-2013,11:17 AMPortable Comtech 13', Winegard 10', SAMI 7.5', 3 39" Ku dishes one motorized. Scanning 30w-131w
-
Post Thanks / Like - 1 Thanks, 0 Likes, 0 Kiss My Asspclaude thanked for this post