Thats great you are able to use parts from the DSR to modify those. I have a stack of those receivers along with some other analog units.
Results 61 to 62 of 62
-
05-24-2020,06:29 PMPortable Comtech 13', Winegard 10', SAMI 7.5', 3 39" Ku dishes one motorized. Scanning 30w-131w
-
Post Thanks / Like - 1 Thanks, 0 Likes, 0 Kiss My AssViP3R thanked for this post
-
06-18-2020,07:24 AM
Well shoot!! My DiSEqC switch inside the box failed. I've never had a DiSEqC switch fail in all my years of using them. I fried a multi-switch once with total abuse, but never had a DiSEqC failure. So I got into my rebuild ideas sooner than expected. Rotating the main boards was the primary target. But I needed to optimize my space inside the box. Reducing the footprint of the power supply would be a way to do it. The PS Bandito suggested was indeed smaller than what I was using but actually had a larger footprint. Since they had a low profile I thought to stack them but they didn't offer a 18V ~ 22V option for the logic circuits. I had some time ago found a split-bobbin 18V transformer I intended to use and decide to go with it. The inside of the case is 8" X 8" and the mounting plate is somewhat smaller. So I got a new mounting plate and cut it larger than the original. ( 7-3/4" X 6-3/4") With the reduced size of the split-bobbin transformer it all fit together nicely.
[Only registered and activated users can see links. ]
[Only registered and activated users can see links. ]
-
Post Thanks / Like - 1 Thanks, 0 Likes, 0 Kiss My Assel bandido thanked for this post