1. Download the archive with the bootloader. (see above)

2. Format the USB flash drive in FAT32.
3. Extract the bootloader from the archive, copy the file with the .ird extension to an empty USB flash drive.

4. Turn off the receiver, insert the USB flash drive into the receiver. Turn on the receiver by pressing the CH_up button and hold it for 10-15 seconds.
After changing the bootloader, we proceed directly to the installation of Enigma2 itself.
5. We clean the flash drive.
6. Download the Enigma 2 image, extract two files root.img and uImage from the archive. Copy these 2 files to an empty flash drive.

You can download Enigma 2 images for Optibox Gekko [Only registered and activated users can see links. ].

7. Turn off the receiver (hold the off button on the remote control for about 8 seconds). Insert the flash drive into the receiver. Press the CH_down button and hold it for 10-15 seconds or until scan appears on the display . After that, we do not touch the receiver until it boots itself.