Optibox Anaconda Question Thread

[easily confused]

Thanks, bud, did a reboot and went back to G17 and blind scan is now working fine. The more I see of the box, the more I like it.

[rodder]

TP Problem trying to scan 3920-V-30000 s/2 5/6 8psk on 105 got a 84% signal it will scan half way and lock up.

[Guest]

TP Problem trying to scan 3920-V-30000 s/2 5/6 8psk on 105 got a 84% signal it will scan half way and lock up.

First time I tried that tp I had issues as well. I scanned the 3920 tp yesterday without any problems on a blind scan- all channels not just fta only. Most of those channels have now gone encrypted, if I'm not mistaken the only 2 still open are Pursuit and Bounce.

[el bandido]

TP Problem trying to scan 3920-V-30000 s/2 5/6 8psk on 105 got a 84% signal it will scan half way and lock up.

Thanks for the info.
What scan settings are you using?

[rodder]

i was scanning tv only and all on manual scan

[Guest]

Try a blind scan with all channels and see if they scan in.

[rodder]

tried a blind scan again it locked up on the first tp 4001-v-29999

[easily confused]

Try changing the parameters so that your scan does not go above 4000. Nothing above that, that isn't encrypted. I had the same problem on another sat with tp 4161 and stopping below it solved the issue.

[el bandido]

I appreciate these problems being posted where we can see them. They have promised to work on the blind scan issues.

EC, If the receiver is hanging on a blind scan, I would like to know what satellite and what transponder(s) it hangs on. Hopefully there will be a pattern so we can understand the problem better. EB

[easily confused]

The main reason I didn't post it, EB was that the tp it hung up on was well above the highest tp listed with Lyngsat. It just seem very strange that it found such a high tp. I wil try to find it again. If memory serves correctly it was tp 4161 on 105. I'll move the bud over and run a blind scan right now.