I wanted to see how the new Micro-HD receivers performed so I purchased a Skybox S12. This receiver is about 6 inches wide, 4 inches deep, and about an inch and a half in height. The power supply for this receiver is mated to the wall plug, and there is not a display or any buttons on the front of the receiver. The RS232 port is 4 pins on the back of the receiver so an adapter is required to use the RS232 port.
You may post any questions you have about this receiver in this thread. I plan to post some pictures and comment on what I find out about this receiver after I have ran it a bit. EB
Automatic Translations (Powered by Yandex):
Results 1 to 10 of 31
Threaded View
-
My Review of the Skybox S12 Micro-HD receiver
Open PLi
- Join Date
- Dec 2010
- Location
- Atlanta, Ga.
- Posts
- 8,347
- Post Thanks / Like
My Review of the Skybox S12 Micro-HD receiver –
12-14-2011,07:30 PM
Last edited by el bandido; 12-14-2011 at 10:19 PM.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
