Openbox S10 TP_PROG.DBS With CW Channels - Discussion

[rrob311]

Cool, i renamed the file and it worked. Only my STB reboots every time I try to run USALS and it also reboots on dvb-s2 channels that have a marginal signal so I think the box has a hardware problem. I tried 3 firmwares and same problem. It shuts off instantly when you try to turn on motor. :-(

[el bandido]

Sorry to hear you are having problems. Sometimes things are sold cheap for a reason.
I would agree that your receiver has some kind of problem. You might disconnect the motor or better yet, disconnect the coax from the receiver and see if the turning off problem stops when you select usals or the motor.

[dr.zin]

I know surges on the coax make the receiver reboot,like plugging in the coax with receiver on(I have a push on adapter for mine)
Maybe look into different firmwares.

[dr.zin]

Cool, i renamed the file and it worked. Only my STB reboots every time I try to run USALS and it also reboots on dvb-s2 channels that have a marginal signal so I think the box has a hardware problem. I tried 3 firmwares and same problem. It shuts off instantly when you try to turn on motor. :-(

check to make sure the regulator chip on the power supply is the SD4844p,the SD4841p was only good for 10watts.
also check the date on the power supply board itself.mine was made 09-2011 one month before I bought it.