TNAP-5.1 Image Discussion

[el bandido]

Now we meed the values being outputted. and do the following:

Go to signal finder and tune the first transponder 117w. Note the signal value.
Telnet to the receiver
cd /usr/lib/enigma2/python
enter this command to see what the blindscan plugin thinks the transponder signal values are.
python Dvbcsvb.py
Copy what the above command outputs. and then also copy what the value for the transponder is in signal finder.

If we have what the blindscan thinks the signal is compared to what the signal really is, then we can make a somewhat usable value to be outputted in blindscan plugin.

You may repeat this for the other 2 satellites.

[cyberham]

Copy what the above command outputs. and then also copy what the value for the transponder is in signal finder....

117W:
BitError 0; Status 31; SNR 458.74; Strength 41942
Signal Finder: 10.5 dB

123W:
BitError 0; Status 31; SNR 439.08; Strength 39976
Signal Finder: 10.2 dB

129W:
BitError 0; Status 31; SNR 537.38; Strength 44563
Signal Finder: 12.4 dB