TNAP-5.1 Image Discussion

[cyberham]

Per Post#123,
Did you Notice there is an online update??? Menu--->Setup--->Software update. See if that fixes it. Thanks for your efforts!

Yes. I installed and issue is resolved.

[el bandido]

Yes. I installed and issue is resolved.

There is One issue left.
Octagon SF8008 has only one signal to deal with. Edision has three. Signal levels for Edision are different in T2MI and Non-T2MI drivers. What about Tuner 2 in the Edision MIO+? What does it show?

With the last Blindscan update installed, Can you set up tuner 2 as a motorized dish for about 3 satellites and tell me what the signal shows as compared to what it should be when the dish motor starts. If we can get the signal values for tuner 2 we can calibrate it.

Thanks.

[cyberham]

...If we can get the signal values for tuner 2 we can calibrate it....

With Tuner B configured with the motor, the Start Dish Motor function moves the dish correctly but there are no readings.
129W: Blind Scan screen shows 0 dB. Should be 12.0 dB.
123W: Blind Scan screen shows 0 dB. Should be 12.0 dB.
117W: Blind Scan screen shows 0 dB. Should be 10.4 dB.