After the latest online updates, it seems to me my blind scans are faster. For example a blind scan of 99W Ku just now took 2:07. Very quick. Part of this may be related to installing a larger (4-foot) dish so the received signals are stronger and stand out from the noise. In the past, they had been getting very slow lasting over 5 or 6 minutes just to scan some Ku sat bands only. The software is stable for me.
Having said this, the Start Dish Motor feature seems not to be working now after these updates (or earlier updates?) though the feature worked previously. For 99W Ku, when I tried it this morning even with the dish manually peaked and receiving the first transponder of 11718 H 2390 Montana PBS at 9.3 dB, the reading shown by the Start Dish Motor feature is 2.08 dB. Similar happened on 103W Ku. I normally always manually peak the dish before blind scanning anyway so this feature doesn't matter to me.
Thread: TNAP-5.1 Image Discussion
Results 1 to 10 of 148
Threaded View
-
05-04-2024,08:33 AMEdision OS Mio+ 4K UHD w/TNAP 5.1, 4-foot motorized Fortec offset dish (150W to 82W), Invacom QPH-031 Ku linear/circular LNBF, Titanium C1PLL LNBF. 41-inch Star Choice: 81W to 77W, Avenger PLL universal LNB. Shaw 60e elliptical dish 103W/99W. Hauppauge 950Q OTA USB, Clearstream 2V, CM-7777 preamp.
-
Post Thanks / Like - 1 Thanks, 0 Likes, 0 Kiss My Assel bandido thanked for this post