I ordered the optional pvr kit so I can have a hard drive installed directly to the box. Should know how well it works in a couple of weeks.
Thread: VU+ Zero 4K Receiver.
Results 71 to 80 of 251
-
03-25-2018,02:37 PM
-
03-25-2018,07:38 PM
Hello EB
I been looking for this Kit, can you share where you order it from.
Let me know.
Thanks.
Chewie
-
-
-
Post Thanks / Like - 1 Thanks, 0 Likes, 0 Kiss My AssViP3R thanked for this post
-
03-25-2018,10:32 PM
Thanks for the link EB I order mine also, can you share that black home image.
Let me know I would like to try it.
Thanks.
Regards.
Chewie
-
03-25-2018,10:41 PM
Sure.
Let me look it over a little bit and make a few adjustments to it. Would like to make it better than it is.
-
03-26-2018,05:04 PM
Install to the Blindscan folder and reboot.
Start scan is 950 and end scan is 1450.
C band only.
-
03-26-2018,06:28 PM
Thanks EB, I will give a shot.
Regards.
Chewie
-
04-02-2018,10:17 PM
Tracking shows the PVR kit has shipped, but not really anything else. I will probably get the PVR kit late this week or early next week.
OpenPLi has released a new test image called Release Candidate 6.2 or RC 6.2. This image runs exceptionally well on my Zero 4K. I do not have switching issues with this image, and I only need the universal blindscan to be fixed by VU+.
I have done a bit more to the blindscan plugin. DVB-S FEC was set to auto because some boxes require that setting. I removed the DVB-S FEC auto setting, and set ALL of the DVB-S2X transponders to log as FEC Auto. This is a work-around, but it will have to do until DVB-S2X can be added properly in enigma2 images. DVB-S2X blindscan is working at least, so this will have to work for now.
[Only registered and activated users can see links. ]Last edited by el bandido; 04-03-2018 at 07:57 AM.
-
Post Thanks / Like - 2 Thanks, 0 Likes, 0 Kiss My Ass
-
04-03-2018,08:03 PM
Blindscan is finding transponders below 1000 symbol rate. I have set the blindscan plugin to go down to a symbol rate of about 500. I can set the symbol rate to go down to 100 or 200, but the setting is useless if the tuner cannot scan or tune it. Just have to keep testing it to see what it can do.
[Only registered and activated users can see links. ]
-
Post Thanks / Like - 2 Thanks, 0 Likes, 0 Kiss My Ass