VU+ Zero 4K Receiver.

[el bandido]

The only way I know to see the DVB-S2X transponders being logged is to use the telnet terminal and look at the data as shown below.
[Only registered and activated users can see links. ]

My modified blindscan plugin defines DVB-S2X as DVB-S2, and sets the DVB-S2X FEC to Auto or None. Setting it this way allows the receiver to scan the DVB-S2X transponder as DVB-S2. This works because the tuner in the receiver Zero 4K receiver can auto detect.

[zonetech1961]

Thanks for the post, can You share your plugin, I will have to figure out how to install it
I've used FileZilla in the past, not sure that is what I need though

[el bandido]

FileZilla is not that hard to use. The receiver will need to be connected to the same network as the computer that has FileZilla will be used for file transfers. Tutorials for FileZilla are easy to find using Google.

[zonetech1961]

Thanks
I'm comfortable using it

[el bandido]

Are you running OpenPLi image or image based on PLi?

[zonetech1961]

Right now OpenPli

[el bandido]

Replace the attached file named plugin.py in the Blindscan folder located at: /usr/lib/enigma2/python/Plugins/SystemPlugins/Blindscan
Reboot the box.
DVB-S2X transponders will be logged as DVB-S2, FEC = None.

This is the best we can do until DVB-S2X is properly added.

[zonetech1961]

Thanks, I got it replaced with Yours
now to try it out
Do I use putty to see the log of tps scanned

[el bandido]

Yes. Use putty (telnet).
Type these commands and press enter after each command
init 4
ENIGMA_DEBUG_LVL=5 enigma2

Press Ctrl and c to break. init 3 will restart the box and exit telnet logging.

[zonetech1961]

Been enjoying the Zero 4K, It blindscans pretty fast
remote button response is fast also
wifi dongle also works well
images are easy to load
Picture quality is great, in my OP
Overall good little Receiver