Page 4 of 4 FirstFirst 1234
Results 31 to 35 of 35
  1. Collapse Details
    #31
    Join Date
    May 2012
    Posts
    258
    Post Thanks / Like
    Contribute If you enjoy reading the
    content here, click the below
    image to support our site.
    Click Here To Contribute To Our Site
    I use only 1 lo of 13850 and adjust the tps from the opposite polarity to that lo...only have one polarity available to each stacked lnb so they cant change.

    Anyway I found a solution/workaround !!!!!

    I change the ones that werent working to Cband LO. That apparently released the control of the 22. So even though they are KU lnb I set the LNB in E2 to be a cband LO. Then adjusted the tps frequencies to that of 5150 instead of 10750 and wala it worked. The bandstacked lnbs on only one polarity must mess with the 2.0 and cause it to tryand fit all the ranges from both polarities and 22 on/off onto the 4 ports....therfore messing everything up..when changed to cband lo then it removes that "thought" since one is ku and one is "cband"
    Ha tricked it...knew there was a way!

    Thanks for all of your help!!!!!!!!
    Reply With Quote
     

  2. Thanks el bandido thanked for this post
    Likes el bandido liked this post
  3. Collapse Details
    #32
    Join Date
    Dec 2010
    Location
    Atlanta, Ga.
    Posts
    8,188
    Post Thanks / Like
    LOL

    I guess you could use the Ka lnb setting the same way.

    Glad you found a way to make it work!
    .
    .
    .
    Meine Dreambox One ist ein Stück Scheiße!.
    Reply With Quote
     

  4. Thanks mountaineer thanked for this post
  5. Collapse Details
    #33
    Join Date
    Dec 2010
    Location
    Atlanta, Ga.
    Posts
    8,188
    Post Thanks / Like
    BTW,
    That is a very nice switch! Found a Video of it.

    Reply With Quote
     

  6. Thanks mountaineer thanked for this post
  7. Collapse Details
    #34
    Join Date
    May 2012
    Posts
    258
    Post Thanks / Like
    Would you believe I got it for $40 shipped on ebay? I was shocked...it is an excellent switch...almost no insertion loss.

    Thanks for all of your help!
    Reply With Quote
     

  8. Thanks el bandido thanked for this post
  9. Collapse Details
    #35
    Join Date
    Dec 2010
    Location
    Atlanta, Ga.
    Posts
    8,188
    Post Thanks / Like
    I think the NimManager file could be changed so the LOF changes automatically in the receiver when the polarity switches.
    Here is an incomplete example:
    if currSat.voltage.value == "polarization":
    if config.Nims[slotid].diseqc13V.value:
    sec.setVoltageMode(switchParam.HV_13)
    else:
    sec.setVoltageMode(switchParam.HV)
    elif currSat.voltage.value == "13V":
    sec.setVoltageMode(switchParam._14V)
    sec.setLNBLOFL(10750000)
    sec.setLNBLOFH(10750000)

    elif currSat.voltage.value == "18V":
    sec.setVoltageMode(switchParam._18V)
    I guess something for me to look at in the future.
    Reply With Quote
     

  10. Thanks mountaineer thanked for this post
Page 4 of 4 FirstFirst 1234

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •